Installation and Operation Manual
NCSP3
12
• PASSCODE PROTECTION
• Text Editing*
• SETTINGS
1. Select “Settings”
.
From the Menu screen you can:
• Edit iN-Command function text
• Reposition functions
• Enable/disable functions
• Change the switch properties (from momentary to latch)
• See the status of iN-Command
• Connect devices with Bluetooth
• Change the passcode
• Reset the oor plan
• Control the brightness of the DC screen
• View iN-Command’s Legal documents and customer support information.
The Administration page is used by the manufacturer.
A passcode is required to access the system.
1. On the rst time use of the system, the user is required to enter and
conrm a new passcode.
When the “Panic” button is engaged from the DC Home Page or mobile
devices app, the Interior and Exterior lights will alternate cycling on and off.
Press the “Panic” button again to disengage the panic function.
• PANIC WARNING