Installation and Operation Manual

NCSP3CM

• HVAC

From the HVAC page, you can control the Heating, Ventilation

and Air conditioning functions in the RV.

With iN-Command, you can control up to 4 HVAC zones and

schedule times for the HVAC function to be active.

The Vent fans for each zone can be opened, closed and the fan speed

can be switched between low, medium and high.

1. Select the desired Zone. Press the "Mode" button to switch to

"Cool" mode.

2. Use the "Set" up and down arrows to set the desired temperature

for the zone.

3. Press the "Fan" button to switch between Low,High and Auto fan speeds.

• Vent Fans

1. To have just the AC fan operating in a zone, select the desired

Zone, the press the "Mode" button to switch to Fan mode.

2. Press the " Fan" button to switch between Low and High fan

speeds.

• Fan Only Mode

• AC Cooling