Data Sheet

Controller Microchip dsPIC33

Memory 32kB Flash, 2kB EEPROM

Power Supply 10...30V (via backplane bus)

Measurement Inputs 12 inputs for AC current sensors up to 600A, frequency range 10Hz…1kHz

Communication Backplane bus

HMI Status LEDs

Temperature range 0°C to 50°C

Size 125mm x 110mm x 18mm

Additional long-term availability, DIN-rail mountable

DESCRIPTION.

The Energy AddOn is part of the “Smart4Hub” product family to increase the functionality of the

HUB-GM100. To turn on the Energy AddOn has to be connected via the available backplane bus. This

also enables the communication with the HUB-GM100. It is designed for use with up to 12 AC current

clamp sensors. Therefore it can be easily mounted in existing installations to display the recent current

consumption. The use of TDK CCT current sensor family is recommended.

Condition monitoring

Energy management

Preventive maintenance

Industrial automation

Home automation

HUB-EN100

APPLICATIONS.

Systemintegrator for industry 4.0 applications.

SPECIFICATIONS.

Available at our Shop www.shop.inhub.de

in.hub GmbH

Technologie-Campus 1 · 09126 Chemnitz

+49 371 534 7825 info@inhub.de

www.inhub.de

PAGE 1
Systemintegrator for industry 4.0 applications. HUB-EN100 DESCRIPTION. The Energy AddOn is part of the “Smart4Hub” product family to increase the functionality of the HUB-GM100. To turn on the Energy AddOn has to be connected via the available backplane bus. This also enables the communication with the HUB-GM100. It is designed for use with up to 12 AC current clamp sensors. Therefore it can be easily mounted in existing installations to display the recent current consumption.
PAGE 2
Systemintegrator for industry 4.0 applications conception and consulting interconnection analyse and visualise sensor technology electronic and interfaces operate and maintaining www.inhub.