Operators Manual Owner manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 General Specifications
- 4 Sensor Specifications
- 5 Instrument Overview
- 6 System Components
- 7 Probe Setup
- 8 Communication Settings and Calibration
- Connect the Instrument to the Computer
- Connect the Instrument to Win-Situ 5 Software
- First Screen (Data Tab)
- Set Communication Outputs
- Modbus Setup
- SDI-12 Setup
- View and Record Data
- Calibrate and Set Up Sensors
- Set Parameter Units and Sentinel Values
- RDO Sensor Calibration
- Conductivity Calibration
- Pressure/Level
- pH/ORP Calibration
- 9 Controller Requirements and Connections
- 10 Care and Maintenance
- 11 Declaration of Conformity
800-446-1500 3 www.in-situ.com
Table of Contents
1 Introduction
5
Scope 5
Serial Number Location 5
2 Safety
5
Electrical Safety 5
3 General Specifications
6
4 Sensor Specifications
7
Level, Depth, Pressure Sensor Specifications 7
Conductivity Sensor Specifications 7
Dissolved Oxygen RDO Classic (Optical Sensor) Specifications 8
ORP Sensor Specifications 8
pH Sensor Specifications 9
Sample Temperature Sensor Specifications (Probe) 9
5 Instrument Overview
10
Instrument Description 10
6 System Components
10
Probe Dimensions with Restrictor On 11
Probe Dimensions with Restrictor Off 11
Sensors 12
Cable 12
Win-Situ 5 Software 12
7 Probe Setup
13
Installing the Sensors 14
8 Communication Settings and Calibration
16
Connect the Instrument to the Computer 16
Connect the Instrument to Win-Situ 5 Software 16
First Screen (Data Tab) 17
Set Communication Outputs 18
Modbus Setup 19
SDI-12 Setup 20
View and Record Data 21
Calibrate and Set Up Sensors 23
Set Parameter Units and Sentinel Values 24
RDO Sensor Calibration 25
Calibration 100% Oxygen Saturation 25
Calibrate 0% Oxygen Saturation 26