Manual

Information Sheet

Due to continuing product development this information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, TROLL, BaroTROLL,

RuggedReader, RuggedCable, and RDO are trademarks or registered trademarks of In-Situ Inc. Viton is a registered trademark of DuPont Dow Elastomers.

1 800 446 7488

(toll-free, US and Canada) or 970 498 1500 www.in-situ.com

Level

TROLL

Accessories

Aqua

TROLL

Accessories

TROLL

9500 Accessories

Catalog No. 0051490

CABLE EXTENDER

APPLICATION

Titanium adapter for joining two lengths of RuggedCable™. Twist-Lock connectors

mate with connectors on cable.

PHYSICAL DESCRIPTION

Wetted materials Titanium, Viton

Size 9.8 cm (3.8 in) long, 18.3 mm (0.72 in) O.D.

CONNECTIONS

1. Remove the protective dust caps from the adapter and cables. The cable ends

are identical, and both sides of the adapter are identical, so orientation is not

important.

2. Attach the Cable Extender to each piece of cable:

GUIDELINES & PRECAUTIONS

• Soft dust caps protect the connectors during shipping. Keep the dust caps to

protect the pins and o-rings when the connectors are not mated.

• Be sure you hear a “click” when the connectors lock together. The “click”

ensures the cable is securely attached.

• There is no limit to the number of cable extenders that may be used. However,

long cable lengths will lower optimal communication speed and increase data

download time.

• Replacement o-rings are available from In-Situ Inc. or your distributor.

Twist-Lock connectors

Mating pin

O-ring

0051492 rev. 002 10/06

Attaching cables or accessories is a simple matter of mating the Twist-

Lock connectors. This is easy after you've done it once or twice. For

detailed steps and photographs, see the Product Quick Start Guide, or

refer to the Operator's Manual located on the software CD.