User's Manual

Confidential under NDA

Installation Environment

Install the Controller in a site free from strong electromagnetic field generators (such as motors), vibration,

dust, and direct exposure to sunlight.

Install the Controller in a fairly cool and dry place for the acceptable temperature and humidity operating

ranges. See section 6 on page 11 for the actual temperature ranges.

Install the Controller on a sturdy, level surface that can support at least 5 kg (11 lbs) of weight. Leave at least

10 cm (4 inches) of space at the front for the coax cables.

Connect a 75-ohm terminator (F connector) in all coax ports that are not used on the Controller.

Make sure that there are no insulating materials that can cover the Controller by accident.

Please also make sure that there are no corrosive liquids or materials that can emit any corrosive gases in the

same room as the Controller.

Storage Environment

The ideal storage location is a dry and well-ventilated location, e.g. in a space with climate-control. Please refer

to section 6 on page 11 for more details about the specified environmental conditions.

Theft and Vandalism

Depending on the circumstances for the installation it may be appropriate to mount the equipment (i.e. the

Controller, and eventual Diplexers and Switches) in a cabinet that can be locked securely.