User's Manual

Confidential under NDA

4.4 The in:xtnd™ | Access | MA2.5 | 2

The Modem is an Ethernet network terminal. It is available in different models with one or two ports. There are

also different variants depending on which MoCA band is used.

The Modem connects to any antenna outlet in the subscribers’ homes for easy self-installation. It

communicates with the Controller to get configuration parameters and connects to the subscribers’ local area

Ethernet e.g. usually a residential gateway using Ethernet CAT cables with RJ45 plug. (InCoax recommends

using CAT5e cable type as a minimum for best performance.) The firmware of the Modem can be upgraded

from the Controller.

4.5 The in:xtnd™ Quality of Service

The in:xtnd™ Controller supports up to four queues, broadcast and multicast Quality of Service (QoS). It also

supports prioritization between unicast and broadcast/multicast, and classification. Unicast QoS can be set

individually for each Modem.

4.6 The in:xtnd™ Basic Product Connection

Figure 2 shows an example of the in-building connections for the basic products.

Figure 2 — Overview of the basic in-building connections.

Operator

Management

Network

Home

Computer

Coaxial cable

Ethernet cable

Controller

Modem

Router

Ethernet cable

Kommenterad [CL3]: Byt bild på modemet.