User's Manual

12 Copyright © 2018 InCoax Networks AB. All rights reserved.
Confidential under NDA
3.3.3.1 Adding Modems Manually
1. Make sure that the Modem is switched off .
2. In the main menu, hover over MODEMS and click on OVERVIEW.
3. Click on ADD MODEM in the Options menu to the right. (See Figure 7 .)
4. Enter the MAC address of the Modem in the field MAC . The MAC address can be found on the product label
placed on the Modem.
5. In the Service & QoS , as seen in Figure 8 , set the MoCA band and frequency to the same values as the coax
port. This is to ensure that the Modem can establish a link to the intended coax port.
6. Configure other relevant parameters like VLAN, priorities, etc.
7. Click on the button Add modem to add this Modem.
8. Connect the Modem to the coaxial network and connect the power adapter.
Figure 7 — Add Modem - Basic Settings.
Figure 8 — Add Modem - Service and QoS; Switch Configuration