User's Manual

Confidential under NDA

3.7.9

Import/Export

This section is used to import and export Controller settings from local saved files, and to reset the Controller to

the factory defaults. To show the web page hover over

SETTINGS

and click on

IMPORT/EXPORT

. The web page

Figure 45

will be shown and the description of the parameters is found in

Table 20

Figure 45 – Import/Export

Table 20 — Description of the parameters of the Import/Export settings.

Term Value Definition

Reset settings Click to reset the Controller to the factory defaults.

Export settings Click to save current Controller settings to a backup file.

Import settings

Select file Select the file containing the desired information.

Upload file Click to confirm.

3.7.10

Firmware

This is used to roll back to a previous firmware version or to upload a new firmware. To show the web page

hover over

SETTINGS

and click on

IMPORT/EXPORT

. The web page in

Figure 46

will be shown and the

description of the parameters is found in

Table 21

Figure 46 – Settings – Firmware.

Table 21 — Description of the parameters for the settings of the Firmware.

Term Value Definition

Switch controller firmware

Roll over to Select the firmware by clicking on one of the radio buttons.

Apply Click to confirm

Upload new controller firmware

Select file for upload

Select a verified and functioning firmware file, and upload the

firmware to the Controller.

Upload file Click to confirm.