User manual

07
2.1 ANALOGUE CONNECTION
1. Connect a 3.5mm end of a suitable audio cable to phone jacket on the receiver
2. Connect the other end to an audio input on your home stereo system (3.5mm or 3.5mm +
3.5mmm -> 2 RCA). Consult your stereo user’s manual for more information on how to accomplish
this.
2.2 DIGITAL CONNECTION
1. Connect one TOSLINK cable end to optical jacket on the Premium Bluetooth Receivers
(recommended)
2. Connect the other end to one TOSLINK input of your home stereo system. Consult your stereo
user’s manual for more information on how to accomplish this.
3. Connect AC power adaptor cable to DC input jacket of Premium Bluetooth Receivers, AC end to
any AC outlet.
4. The LED light will flash once to show the unit is powered and ready for being paired for your
devices.
2.3 NFC FAST CONNECTION
The premium Bluetooth receiver is equipped with a standard NFC tag (NFC = Near Field Communication).
Before you can use this feature, you need to check your Smartphone or tablet with NFC function and the
operational system is Android 4.1 and above.
Start the NFC function
1. Turn on the NFC function, as described in your manual
2. Tap the Receiver with your smartphone or tablet to connect
3. Tap it again to disconnect
3.0 PAIRING A RECEIVER
For pairing with your phone, please follow the instructions for setting Bluetooth on the manual of your
device.
NOTE
Some devices, such as iPhone, will connect immediately after pairing so the LED will ON. Other devices,
such as notebook, may ask you if you wish to connect and LED will go off after pairing until a connection is
established.
The Premium Bluetooth Receiver is capable of being paired to up to 8 devices. It means that you have to
enter the PIN code once for each device. PIN: 0000
The effective range of the PREMIUM Bluetooth receiver is 33 feet (10M).
RECONNECTING YOUR DEVICE
If you move out of range or turn off the Bluetooth feature on you iPad/iPhone/iPod touch or
Smartphone,BTR-1500 will disconnected from your device. To reconnect, simply open the Bluetooth
manager and tap on the “Music Receiver”, then you do not need to input PIN again, the connection will be
done automatically.
USER MANUAL