Product Manual

34
: Go to Past Measured Results
: Go to Recent Measured Results
Order Based on
the Sequence
Date and Time
Values which are Out
of the Range Blinks
Systolic & Diastolic Values Setting
Set Ranges Will be
Displayed While Pressed
E. Checking Saved Measurements (MEMORY MODE)
(1) Press the [M] button to check the saved measurements.
(2) Sequence number and measurement date and time are displayed.
  (3)Pressthe[▼]or[▲]buttontocheckthesavedresultsonebyone.
(4) Recorded results in CYCLE RANGE mode are displayed as below.
- If the measured value is out of the set range, the measured value will blink.
- The set range can be checked while the [MODE] button is held down.