Installation & Assembly (Chair)

Assembly Instructions

M6*20mm

M6*30mm

M8*40mm

1 2 3

Press the casters into the holes at the

end of each base leg.

Insert the lift with cover into the center hole

of the star base.

Check all the components & screws before assembly. Do not install in case part is

missing, contact us to get.

(Φ6+Φ15)*1.5mm

(Φ8+Φ18)*1.5mm

Attach the seat plate to the seat cushion

using four (A) screws and four (D) washers

using the wrench (F)

PAGE 1
Assembly Instructions A M6*20mm 4 B M6*30mm 6 C M8*40mm 3 D (Φ6+Φ15)*1.5mm 10 E (Φ8+Φ18)*1.5mm 3 F M6 1 Check all the components & screws before assembly. Do not install in case part is missing, contact us to get. 1 Press the casters into the holes at the end of each base leg. 2 Insert the lift with cover into the center hole of the star base.
PAGE 2
4 Attach arm rests to seat cushion using six (B) screws and six (D) washers using the wrench (F). D B 7 For your safety, before using your chair, make sure that all of the screws are fully tightened. 5 Attach the back cushion to the seat cushion using three (C) screws and three (E) washers using the wrench (F).