User Manual

© Inno
Care Optoelectronics
-
Where the equipment is exposed to direct sunlight.
Use the equipment on a flat place. If the equipment falls, it may cause damage
to the equipment or personal injury.
When you move the equipment, place it in the cassette storage box of a mobile
X-
ray unit or hold it by hand to prevent it from falling. If the cart is used to move
the equipment, place it horizontally.
For veterinary or mobile applications, contac
Representative.
When the devices are used outdoors in
our official dealer or I
nnoCare
Do not place any object in a place where removal of the power cable is
prevented.
To ensure optimal image quality, it is recommended that you do not use the flat
panel detector
near devices (motor, transformer, switching supply, etc.) that
generate electromagnetic noise.
To ensure optimal image quality, it is recommended that you do not place the
cables (power cable,
back
(motor
, transformer, switching supply, etc.) that generate electromagnetic
noise and their cables.
_____________________________________________________________
2.7 Connection Instructions
_____________________________________________________________
Warning
M
ake sure that the devices to be connected to the equipment are authorized
for connection.
Connect the panel unit
Yushan
_____________________________________________________________
2.8
External Network Connection
___
__________________________________________________________
Care Optoelectronics
Corporaon │ X-
Ray Products
Where the equipment is exposed to direct sunlight.
Use the equipment on a flat place. If the equipment falls, it may cause damage
to the equipment or personal injury.
When you move the equipment, place it in the cassette storage box of a mobile
ray unit or hold it by hand to prevent it from falling. If the cart is used to move
the equipment, place it horizontally.
For veterinary or mobile applications, contac
t our official dealer or I
When the devices are used outdoors in
wireless communication mode, contac
nnoCare
Representative.
Do not place any object in a place where removal of the power cable is
To ensure optimal image quality, it is recommended that you do not use the flat
near devices (motor, transformer, switching supply, etc.) that
generate electromagnetic noise.
To ensure optimal image quality, it is recommended that you do not place the
back
-up
cable, etc.) of the equipment near devices
, transformer, switching supply, etc.) that generate electromagnetic
_____________________________________________________________
2.7 Connection Instructions
_____________________________________________________________
ake sure that the devices to be connected to the equipment are authorized
Yushan
only to the
access point or DR system.
_____________________________________________________________
External Network Connection
__________________________________________________________
15
Ray Products
Use the equipment on a flat place. If the equipment falls, it may cause damage
When you move the equipment, place it in the cassette storage box of a mobile
ray unit or hold it by hand to prevent it from falling. If the cart is used to move
t our official dealer or I
nnoCare
wireless communication mode, contac
t
Do not place any object in a place where removal of the power cable is
To ensure optimal image quality, it is recommended that you do not use the flat
near devices (motor, transformer, switching supply, etc.) that
To ensure optimal image quality, it is recommended that you do not place the
cable, etc.) of the equipment near devices
, transformer, switching supply, etc.) that generate electromagnetic
_____________________________________________________________
_____________________________________________________________
ake sure that the devices to be connected to the equipment are authorized
access point or DR system.
_____________________________________________________________
External Network Connection
__________________________________________________________