User Manual

© Inno
Care Optoelectronics
Caution
When a setting of the network to which the equipment is connected has been
changed,
check that the change does not affect the system operation and take
measures if necessary.
The setting
change may include the following:
-
Change of connection destination
- Addition of devices
-
Removal of devices
- Update of devices
-
Upgrade of devices
After connecting this system to the network with other systems, confirm that
the other systems are not affected.
such as network separation.
Warning
Make sure to use the optional parts, accessories and networks recommended
by us. Failure to use the optional parts, accessories and networks
recommended by us may result in da
shock and injury.
Connect to the Ethernet Network of 100BASE
the IEEE standard 802.3. Do not connect telephone lines to LAN connector.
Only UTP-
type straight LAN cables of 4
higher are appropriate for connection to this connector.
part15.
_____________________________________________________________
2.9
System Isolation Instructions
_________________________________________________________
Warning
To ensure complete system isolation, never install any unauthorized
accessories or other such items.
Care Optoelectronics
Corporaon │ X-
Ray Products
When a setting of the network to which the equipment is connected has been
check that the change does not affect the system operation and take
change may include the following:
Change of connection destination
Removal of devices
Upgrade of devices
After connecting this system to the network with other systems, confirm that
the other systems are not affected.
If they are affected, take countermeasures
such as network separation.
Make sure to use the optional parts, accessories and networks recommended
by us. Failure to use the optional parts, accessories and networks
recommended by us may result in da
mage to the equipment and/or electric
Connect to the Ethernet Network of 100BASE
-TX or 10BASE-
T prescribed in
the IEEE standard 802.3. Do not connect telephone lines to LAN connector.
type straight LAN cables of 4
-pair Category 5
cable (CAT 5E) or
higher are appropriate for connection to this connector.
Compliant with FCC
_____________________________________________________________
System Isolation Instructions
_________________________________________________________
To ensure complete system isolation, never install any unauthorized
accessories or other such items.
16
Ray Products
When a setting of the network to which the equipment is connected has been
check that the change does not affect the system operation and take
After connecting this system to the network with other systems, confirm that
If they are affected, take countermeasures
Make sure to use the optional parts, accessories and networks recommended
by us. Failure to use the optional parts, accessories and networks
mage to the equipment and/or electric
T prescribed in
the IEEE standard 802.3. Do not connect telephone lines to LAN connector.
cable (CAT 5E) or
Compliant with FCC
_____________________________________________________________
System Isolation Instructions
_________________________________________________________
____
To ensure complete system isolation, never install any unauthorized