User Manual

© Inno
Care Optoelectronics
Chapter
5
Maintenance
5
.1 Daily User Inspection and
Maintenance
During maintenance and inspection, strictly observe precautions contained in
“
Chapter 2 Safety and Regulatory
under best conditions.
5
.1.1 Periodical Inspection
R
emove any dirt or dust accumulated in each part of the
equipment using a vacuum cleaner or air duster, clean each part
with a slightly moistened soft cloth an
with a dry cloth.
See “3.2 Unit Names and the Functions”.
Authorized Personnel
There are no parts/components that
any authorized p
ersonnel
____________________________
Caution
Be sure to turn off the power before cleaning each part of the device.
Ensure sufficient space when cleaning the equipment on a table, etc
_____________________________________________________________
Care Optoelectronics
Corporaon │ X-
Ray Products
5
Daily Inspection and
Maintenance
.1 Daily User Inspection and
Maintenance
During maintenance and inspection, strictly observe precautions contained in
Chapter 2 Safety and Regulatory
” in th
is manual for you to use the
.1.1 Periodical Inspection
End User
emove any dirt or dust accumulated in each part of the
equipment using a vacuum cleaner or air duster, clean each part
with a slightly moistened soft cloth an
d then wipe off any moisture
See “3.2 Unit Names and the Functions”.
Authorized Personnel
There are no parts/components that
needed to be replaced by InnoCare
ersonnel
.
____________________________
_________________________________
Be sure to turn off the power before cleaning each part of the device.
Ensure sufficient space when cleaning the equipment on a table, etc
_____________________________________________________________
61
Ray Products
Daily Inspection and
During maintenance and inspection, strictly observe precautions contained in
is manual for you to use the
device
emove any dirt or dust accumulated in each part of the
equipment using a vacuum cleaner or air duster, clean each part
d then wipe off any moisture
Every
Three
Months
needed to be replaced by InnoCare
or
_________________________________
Be sure to turn off the power before cleaning each part of the device.
Ensure sufficient space when cleaning the equipment on a table, etc
.
_____________________________________________________________