User's Manual

Setting up TV stations
18
STATION
DE
F G OK MENU
Auto
Manual
Favorite Ch.
Antenna Connection F 1 G
Digital Cable F ALL G
Search GGG
Memorizing the Channels with Auto
- For Auto to work, the programming source must be connected to the TV and the TV must be receiving programming sig-
nals either over-the-air or from a cable-type service provider.
Press the MENU button and then use
D / E
button
to select the Station menu.
Press the G button and then use
D / E
button to
select Auto.
Press the G button and then use
D / E
button to
select Antenna Connection.
Press the F / G button to select 1, 2, 3, 4.
Press the
D / E
button to select Digital Cable.
Press the F / G button to select ALL, STD, IRC, HRC.
Press the
D / E
button to select Search.
Press the G button to begin the channel search.
• Wait for auto program to complete the channel search cycle
before choosing a channel. The TV scans for over-the-air
channels and then channels provided by a cable service.
The message “ Search DTV channel? ” will appear. If you want
to search DTV select OK or G. Otherwise select MENU.
NOTES
• When the channel search is complete, use the
D
/
E
buttons to review the memorized channels.
• If you press the MENU button in Auto, the function will stop and only channels programming up to that time will remain.
• Auto function can memorize only the channels which are being received at that time.
Auto
Antenna Connection F 1 G
STATION
DE
F G OK MENU
Auto
Manual
Favorite Ch.
Antenna Connection F 1 G
Digital Cable F ALL G
Search GGG
CATV 126
0 50 %
STOP-MENU
Search DTV channel?
GGG
Auto
Search GGG
STATION
DE
F G OK MENU
Auto
Manual
Favorite Ch.
ANT1 ANT2
Analog
Digital