Use and Care Manual

249
Care and Maintenance
CERAMIC TILE
Glazed
tile
Routine maintenance of glazed and unglazed
tile consists of simply sweeping and damp mopping with clean water and a
mild solution of neutral cleaner formulated for glazed tile. Areas exposed to heavy
can be cleaned with solution of a
heavy-duty neutral cleaner formulated for glazed tile and may also require scrubbing, depending on the texture of the surface.
It is very important to change the mop water frequently -approximately every 100-500 square feet- depending on how soiled the
surface is. Please contact your sales representative for recommendations on the type of cleaner best suited for your application.
Unglazed
tile
Unglazed mosaic, porcelain or quarry
tile should be maintained by dust sweeping and damp mopping with clean water and
a mild solution of neutral cleaner formulated for tile. Areas exposed to heavy
can be cleaned with a solution of a heavy-duty
neutral cleaner formulated for tile and may also require scrubbing, depending the texture of the surface.
As an unglazed quarry tile
ages, a patina forms on the surface which gives it a soft shine and keeps the looking fresh
longer.
Glazed wall tile
Routine maintenance of glazed wall tile usually consists of simply wiping with a damp cloth or sponge. The use of a neutral
cleaner formulated for glazed tile is acceptable as long as any residue is removed with a clean water rinse. Countertop
applications will require more frequent cleaning in this same manner depending on the exposure to grease, foods, acids, etc.
Sealing grout joints on countertops is always recommended to prevent staining. Shower applications will require more periodic
cleaning in order to remove soap scum, body oils and hard water deposit buildup. Normally, shower areas may be cleaned by
spraying a mild solution of neutral cleaner formulated for glazed tile, letting it stand for three to
minutes, and then rinsing. If the
tiled area has been neglected for an extended period of time, a solution of a heavy-duty neutral cleaner formulated for glazed tile
is recommended for cleaning.
Sealers
Refer to the manufacturer’s recommendations before sealing unglazed mosaics, porcelain and quarry tile. There is no need to seal
glazed ceramic tile. However, sealing the grout joints is recommended unless an epoxy grout is used. Please contact your sales
representative for recommendations on the type of grout sealer best suited for your installation.
Glass Wall Tile
For maintenance and cleaning, it is recommended to use a soft, clean cloth with warm water or with a non-abrasive cleaner
formulated for use with glass. Do not use any cleaners with abrasive agent as these could scratch the tile surface.
Glass tile should not be installed in
applications because it can fracture when exposed to extreme weights and is very
susceptible to scratching.