Instruction for Use

EN
7
Wash options
Super Wash
This option offers a high-performance wash due to the
greater quantity of water used in the initial phase of the
cycle, and due to the increased wash cycle duration,
is particularly useful for
the removal of stubborn
stains. It can be used with
or without bleach. If you
desire bleaching, insert the
extra tray compartment (3)
into compartment 1. When
pouring in the bleach, be
careful not to exceed the
“max” level marked on the
central pivot (see figure).
To bleach laundry without
carrying out a full wash cycle, pour the bleach into the
extra compartment 3, select the “Rinse” cycle
and
activate the “Super Wash” option
.
! It cannot be used in conjunction with
, , , , ,
, , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
For the Silk
wash cycle, the machine will end the cycle
while the laundry is soaking and the “Easy Iron” indicator
light will flash. To drain the water so that the laundry may
be removed, press the START/PAUSE button or the “Easy
Iron” button.
! It cannot be used in conjunction with
, , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with
, , , , ,
, , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
! It cannot be used in conjunction with
, , .
3
1
2
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 60456: set wash cycle with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Deter-
gent for
wash
Fabric
softener
Bleach
Cottons wash cycles
Cottons with pre-wash
(Add detergent to the relevant compartment).
90° 1400
 
- 9
Cottons (1): heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1400
  
9
Cottons (2): heavily soiled whites and delicate colours. 40° 1400
  
9
Coloured Cottons (3)
40° 1400
  
9
Shirts
40° 600
  
2
Jeans
40° 800
 
- 4
Special programmes
Baby: heavily soiled delicate colours 40° 800
  
4
Durable Synthetics
60° 800
  
4
Delicate Synthetics
40° 800
  
4
"Bed & Bath" for bedlinen and towels. 60° 1400
  
9
Duvets: for down-stuffed garments. 30° 1200
 
- 3,5
Silk: for garments in silk and viscose, lingerie. 30° 0
 
- 2
Wool: for wool, cashmere, etc. 40° 600
 
- 2
Mix 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800
 
- 3,5
Partials wash cycles
Rinse - 1400 -
 
9
Spin - 1400 - - - 9
Drain - 0 - - - 9
(*) The duration of the wash cycles can be checked on
the display.