Instruction for Use

Display

The display is useful when programming the machine and provides a great deal of information.

The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the

current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress

status of the cycle.

String C shows the time remaining until the end of the wash cycle in progress and, if a DELAYED START has been

set, the time remaining until the start of the selected wash cycle.

String D shows the maximum spin speed value (this depends on the selected wash cycle); if the wash cycle does

not include a spin cycle, the string remains unused.

String E shows the maximum temperature value which may be selected (this depends on the wash cycle used); if

the temperature of the wash cycle cannot be modified, the string remains unused.

Indicator lights F correspond to the functions and light up when the selected function is compatible with the set

wash cycle.

Door locked symbol

If the symbol is lit, this indicates that the washer dryer door is blocked to prevent it from being opened

accidentally. To prevent any damage from occurring, wait for the symbol to switch itself off before opening the

appliance door.

N.B.: if the DELAYED START function has been activated, the door cannot be opened; pauses the machine by

pressing the START/PAUSE button if you wish to open it.

 The first time the machine is switched on, you will be asked to select the language and the display will

automatically show the language selection menu.

To select the desired language press the X and Y buttons; to confirm the selection press the Z button.

If you wish to change the selected language, simultaneously press and hold all the three buttons marked with an L

in the figure, until you hear a beep. Switch the machine on again; the language selection menu will be displayed.