Instruction for Use

ManualsBrandsIndesit ManualsDomestic AppliancesC 66S P6 (X) I

A Tray for Catching Overflows

B Gas Burners

C Electronic Lighting Device

D Top Grate

E Control Panel

F Adjustable Feet or Legs

G Dripping Pan or Baking Sheet

H Flame Failure Device for Cooktop Burners

K Oven Racks

L Selector Knob

M Thermostat Knob

N Control Knobs for Gas Burners on Hob

O Timer Knob (only on certain models)

P Thermostat Light

Q The electronic cooking programmer (only on certain

models)

R End Cooking Time Knob (only on certain models)

S Green Light

How To Use Your Appliance

The various features of cooker are controlled through the knobs

and buttons located on the control panel

Control Knobs for the Gas Burners on the Hob (N)

The position of the gas burner controlled by each one of the

knobs is shown by a solid ring

•. To light one of the burners, hold

a lighted match or lighter near the burner and, at the same time,

press down and turn the corresponding knob counter clockwise

to the maximum

setting. Each burner can be operated at its

maximum, minimum or intermediate power. Shown on the knob

are the different symbols for off

• (the knob is on this setting

when the symbol corresponds with the reference mark on the

control panel), for maximum

and minimum .

To obtain these settings, turn the knob counter clockwise with

respect to the off position. To turn off the burner, turn the knob

clockwise until it stops (corresponding again with the

•symbol).

Electronic Ignition for the Gas Hob

To light a specific burner push the corresponding knob all the

way in and turn it counter-clockwise to maximum

keeping it

pressed down until the burner lights.

Important: Should the burner flames accidentally go out,

turn off the control knob and wait at least 1 minute before

trying to relight.

The “separate double flame” burner*

This burner consists of two concentric burners which can ope-

rate either together or separately.

Use of the double flame on the maximum setting gives a very

high power which reduces cooking times with respect to

conventional burners.

Moreover the double flame crown provides a more uniform

distribution of heat on the bottom of the pan, when using both

burners on minimum.

To ensure that the double-flame burner is used to its full

potential, never set the inside ring to minimum and the

outside ring to maximum at the same time.

Pots and pans of all sizes can be used. In the case of the smaller

pots and pans we recommend the use of only the internal burner.

There is a separate control knob for each of the “separate double

flame” burners.

The knob marked by the symbol

operates the external

burner;

The knob marked by the symbol

operates the internal burner.