Instruction for Use

GB
23
on the DISPLAY, the oven will stop cooking and a buzzer
sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end
time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the
button until the icon and the two
digits on the DISPLAY begin to  ash.
3. Turn the TIMER KNOB towards “+” and “-” to adjust the
hour value.
4. Press the
button again until the other two digits on
the DISPLAY begin to  ash.
5. Turn the TIMER KNOB towards “+” and “-” to adjust the
minute value.
6. Press the
button again to con rm.
7. When the set time has elapsed, the text END appears
on the DISPLAY, the oven will stop cooking and a buzzer
sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed, while the end time is set to
12:30. The programme will start automatically at 11:15
a.m.
Programming has been set when the
and buttons
are illuminated. The DISPLAY shows the cooking end time
and the cooking duration alternately.
To cancel programming, turn the SELECTOR knob to the “0”
position.
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-assisted
cooking. This is because excessive direct heat can burn
temperature sensitive foods.
! In the SPIT ROAST, BARBECUE and ROASTING cooking
modes, place the dripping pan in position 1 to collect
cooking residues (fat and/or grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires
more heat on 2.
• Place the dripping pan on the bottom and the rack on
top.
BARBECUE
• Place the rack in position 3 or 4. Position the food in the
centre of the rack.
• We recommend that the temperature is set to its
maximum level. The top heating element is regulated by
a thermostat and may not always operate constantly.
! A cooking mode must be selected before programming
can take place.
Programming the cooking duration
1. Press the
button several times until the icon and
the three digits on the DISPLAY begin to  ash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust the
duration.
3. Press the
button again to con rm;
4. When the set time has elapsed, the text END appears
Programming cooking