User's Manual

8
IE
GB
)DNALERIdnaNIATIRBTAERG(1elbaTsagdiuqiLsaglarutaN
renruBretemaiD
)mm(
rewoplamrehT
)*.s.H(Wk
ssap-yB
001/1
)mm(
rotcejnI
001/1
)mm(
*wolF
h/g
rotcejnI
001/1
)mm(
*wolF
h/l
.nimoN.cudeR03G13G02G
CdipaR00100.37.00468812412611682
Bdipar-imeS5756.14.0034602181169751
AyrailixuA5500.13.0720537171759
DgnirelpirT03152.33.17519632232421903
ylppuS
erusserp
037302
* At 15°C and 1013 mbar-dry gas
Propane G31 H.s. = 50,37 MJ/kg
TECHNICAL SPECIFICATIONS
ENERGY LABEL
Directive 2002/40/EC on the label of electric ovens
Norm EN 50304
Energy consumption for Natural convection
heating mode: Convection
Declared energy consumption for Forced convection Class
heating mode: Fan assisted (mod. KP 958 MS.B)
Butane G30 H.s. = 49,47 MJ/kg
Methane G20 H.s. = 37,78 MJ/m
3
This appliance conforms with the following European Economic
Community directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent
modifications;
- 90/396/EEC of 29/06/90 (Gas) and subsequent modifications;
- 93/68/EEC of 22/07/93 and subsequent modifications.
Oven accessories which may come into contact with
food are make in materials complying to what is laid
down in EEC Directive 89/109 of 21.12.88 and national
regulations in force.
BURNERS AND NOZZLES SPECIFICATIONS
• the supply system is efficiently earthed according to
standards and laws in force;
• the socket or double-pole switch are easily accessible
when the appliance is installed.
Important: the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
Connect the Green & Yellow wire to terminal marked “E” or
or coloured Green or Green & Yellow.
Connect the Brown wire to the terminal marked “L” or
coloured Red.
ELECTRICAL CONNECTION
Connect the Blue wire to the terminal marked “N” or
coloured Black.
The cable of this appliance are already fitted whit a moulded
plug incorporating a fuse, the value of which is 13A
(indicated on the pin face of the plug). Should the fuse
need to be replaced, an ASTA approved BS1362 fuse must
be used of the same ratingmarked
ASA
. This plug is not
waterproof-keep dry. Fuse cover are available from the
"parts department" indicated in your user instructions. If
the plug supplied is not suitable for your actual outlet, it
should be cut off and destroyed. If the fuse cover is
detachable, never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same
colour asthat visible on the pin face of the plug (ie red or
orange). The end of the flexible cable should be suitably
prepared and the correct plug fitted.