Instruction for Use
AUS
11
Manual Operation Mode for the Oven
After the time has been set, the programmer is automatically set to manual
mode.
Note: Press the button to return the oven to manual mode after every
“Automatic” cooking session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set. Let us suppose that the
display shows 10:00.
1. Turn the oven control knob to the cooking setting and temperature desired
(example: convection oven at 200°C).
2. Press the and the use (within 4 seconds) the and buttons to
set the length of the cooking time. Let us suppose that 30 minutes was
set for the length of the cooking time. In this case, the display will show:
Release the button, and within 4 seconds, the current time will reappear with
the symbol and “auto.”
3. Press the button, and then use the and buttons to set the end
cooking time. Let us suppose that it is 13:00
4. Release the button and the display will show the current time within 4
seconds:
When “auto” is lighted, it indicates that the length and end cooking time
have been preset to operate in automatic mode. At this point, the oven will
turn on automatically at 12:30 in order to nish the cooking session within
30 minutes. When the oven is on, the symbol (cooking pot) will appear
on the display for the entire length of the cooking process. The button
can be pressed at any time to display the setting for the length of the cooking
time, while the button can be pressed to display the end cooking time.
At the end of the cooking time, an acoustic signal will sound. Press any
button it turn it off (except the and buttons).
Immediate Start Time with Preset Cooking Length
When only the length of the cooking time is set (points 1 and 2 of the paragraph
entitled, “Delayed Start Time with Preset Cooking Length”), the cooking
session starts immediately.
Cancelling a Preset Cooking Time
Press the button, and use the button to set the time to:
Then press the manual cooking mode button .
Timer Feature
The timer can be used to count down from a given length of time. This feature
does not control when the oven comes on or turns off, but, rather, it only emits
an acoustic signal when the preset time has run out.
Press the button, and the display will read:
Then use the and buttons to set the desired time.
Release the button, and the timer will start at that second. The display will
show the current time.
At the end of the preset time, an acoustic signal will sound, which can be
turned off by pressing any button (except the and buttons), and the
symbol will turn off.
Changing and Cancelling Settings
• The settings can be changed at any time by pressing the corresponding
button and using the or button.
• When the length setting for the cooking time is cancelled, the end cooking
time setting is also cancelled, and vice versa.
• When in automatic cooking mode, the appliance will not accept end cooking
times prior to the start cooking time proposed by the appliance itself.
Buzzer volume control
Once you have made and conrmed the clock settings, use button to adjust
the volume of the alarm buzzer.
Troubleshooting
It may occur that the appliance does not function or does not function properly.
Before calling customer services for assistance, let’s see what can be done.
First of all, check to see that there are no interruptions in the gas and electrical
supplies, and, in particular, that the gas valves for the mains are open.
The burner does not light or the ame is not uniform around the
burner.
Check to make sure that:
• The gas holes on the burner are not clogged;
• All the removable parts that make up the burner are mounted correctly;
• There are no draughts around the cooking surface.
The ame does not stay on
Check to make sure that:
• You press the knob all the way in;
• You keep the knob pressed in long enough to activate the safety device.
• The gas holes are not clogged in the area corresponding to the safety
device.
The burner does not remain on when set to “Low”.
Check to make sure that:
• The gas holes are not clogged.
• There are no draughts near the cooking surface.
• The minimum has been adjusted correctly (see the section entitled,
“Adjusting the low ame”).
The cookware is not stable.
Check to make sure that:
• The bottom of the cookware is perfectly at.
• The cookware is centered correctly on the burner.