User's Manual

ManualsBrandsIndesit ManualsDishwashersDFE1B19BUK Full Size Dishwasher - Black

DAILY REFERENCE

GUIDE

1. On-O/Reset button with indicator light

2. Push&GO button with indicator light

3. Salt rell indicator light

4. Program selection knob

5. Delay indicator lights

6. Delay button with indicator light

7. Start/Pause button with indicator light / Drain out

CONTROL PANEL

Before using the appliance carefully read Safety Instructions guide.

APPLIANCE

THANK YOU FOR BUYING A INDESIT PRODUCT.

In order to receive a more complete assistance, please

You can download the Safety Instructions and the

User

Manual, by visiting our website docs.indesit.eu

and

following the Instructions on the back of this booklet.

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Cutlery basket

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

0000 000 00000

Service:

PRODUCT DESCRIPTION

1 2 3 4

6 7

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A INDESIT PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.indesit.com/register You can download the Safety Instructions and the User Manual, by visiting our website docs.indesit.eu and following the Instructions on the back of this booklet. Before using the appliance carefully read Safety Instructions guide. PRODUCT DESCRIPTION APPLIANCE 1 7 2 8 3 4 5 9 6 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PAGE 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. FILLING THE SALT RESERVOIR The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY. • It is important to set the water hardness.
PAGE 3
EN Drying phase PROGRAMS TABLE Program Available options *) Duration of wash program (h:min)**) Water consumption (litres/cycle) Energy consumption (kWh/cycle) 1 Eco 50° 3:20 12,0 1,04 2 Intensive 65° 2:30 16,0 1,50 3 Mixed 55° 2:25 16,0 1,35 4 Fast&Clean 28’ 45° - 0:28 9,0 0,60 5 Pre-Wash - - 0:10 4,0 0,01 6 Push&GO 50° 1:25 11,5 1,10 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
PAGE 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. PUSH & GO Push&Go button is an easily distinguishable button that allows you direct access to the Push&Go program, a wash and dry cycle that ensures great cleaning performance in a short time.
PAGE 5
EN LOADING THE RACKS UPPER RACK Load delicate and light dishes: glasses, cups, saucers, low salad bowls. (loading example for the upper rack) ADJUSTING THE HEIGHT OF THE UPPER RACK The height of the upper rack can be adjusted: high position to place bulky crockery in the lower basket and low position to make the most of the tip-up supports by creating more space upwards and avoid collision with the items loaded into lower rack.
PAGE 6
DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the tap is open. 2. SWITCH ON THE DISHWASHER Press the ON/OFF button. 3. LOAD THE RACKS (see LOADING THE RACKS) 4. FILLING THE DETERGENT DISPENSER 5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by turning the PROGRAM SELECTION knob clockwise.
PAGE 7
EN CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. On occasions, food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is therefore recommended that you check the arms from time to time and clean them with a small non-metallic brush.
PAGE 8
TROUBLESHOOTING In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance. PROBLEMS Salt indicator is lit The dishwasher won’t start or does not respond to commands.