Instruction booklet EN English, 1 DISHWASHER Contents Installation, EN 2-3-4 Positioning and levelling Connecting the water and electricity supplies Technical data Description of the appliance, 5 Overall view Control panel Loading the racks, 6 Lower rack Cutlery basket Upper rack Start-up and use, IDTM 7 Starting the dishwasher Loading the detergent Washing options Wash cycles, 8 Wash cycle table Rinse aid and refined salt, 9 Loading the rinse aid Loading the refined salt Care and maintenance
Installation EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.
Connecting the water outlet hose EN Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water. replaced by authorised technicians only. The Company shall not be held responsible for any incidents that occur if these regulations are not observed.
EN Electrical Connection If your appliance is supplied with a 13 amp. fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instruction below. Warning Warning:this appliance must be earthed. Thed following operations should be carried out by a qualified electrician. Replacing the fuse When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted.
Description of the appliance Overall view EN 1 3 2 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Loading the racks EN Before loading the rack, remove all food residue from the crockery, leave saucepans and frying pans with burnt-on residue to soak and empty all remaining liquid from cups and glasses. After loading the appliance, check that the sprayer arms can rotate freely. stops (see figure). If the rack is equipped with the click clack handles* (see figure), pull them upwards or downwards to adjust the height.
Start-up and use Starting the dishwasher Loading the detergent 1. Turn the water tap on. 2. Press the ON/OFF button: the indicator light will illuminate. 3. Open the door and pour in a suitable amount of detergent (see below). 4. Load the racks (see Loading the racks) and shut the door. 5.
Wash cycles Wash cycle table EN INDESIT dishwashers are equipped with an automatic filter cleaning system so that they do not become clogged with food residues. This function may extend the duration of the wash cycles. If there is a high level of dirt contained in the filters, the dishwasher will stop operating (see Troubleshooting - Blocked filter alarm).
Rinse aid and refined salt Only use products that have been specifically designed for dishwashers. Do not use table salt or industrial salt. If using a multi-functional product (2-in-1, 3-in-1, 4-in-1) it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights will flash continuously.
Care and maintenance EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. Cleaning the filters The filters remove food residue from the water used in the wash cycle: to obtain the best results from each wash, they should be cleaned. • Remove the plug from the socket when cleaning the machine and when carrying out maintenance work. Clean the filters regularly. Cleaning the dishwasher The dishwasher should not be used without filters.
Precautions and advice The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. General safety • The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. • The appliance must be used by adults only, to wash domestic crockery according to the instructions in this manual.
Troubleshooting 195051409.01 09/2005-Xerox Business Services EN Whenever the appliance fails to work, check for a solution from the following list before calling for Technical Assistance Centre. Malfunction: Possible causes / Solutions: The dishwasher does not start. • The plug has not been inserted into the electrical socket properly, or there is no power in the house. • The dishwasher door has not been shut properly. • A delayed start has been programmed (see Start-up and use).