Operating Instructions FRIDGE Contents GB English, 11 Installation, 2 Positioning and connection Description of the appliance, 3 Overall view Start-up and use, 4 Starting the appliance Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 5 Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance Replacing the light bulb IN TSZ 1610 UK Precautions and tips, 6 General safety Disposal Respect
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Positioning and connection Positioning 1. Place the appliance in a well-ventilated humidity-free room. 2. Do not obstruct the rear fan grills.
Description of the appliance Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. Removable lidded shelf with EGG TRAY* FREEZER and STORAGE compartment TEMPERATURE control HINGED shelf* Compartment for a 2 LITRE BOTTLE SHELVES BOTTLE shelf FRUIT and VEGETABLE crisper * Available only on certain models.
Start-up and use GB Starting the appliance ! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. 1. Insert the plug into the socket and ensure that the internal light illuminates. 2. Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours you will be able to put food in the refrigerator.
Maintenance and care Switching the appliance off Defrosting the refrigerator compartment During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact. Cleaning the appliance The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. Disposal Observe local environmental standards when disposing packaging material for recycling purposes. The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Malfunctions: Possible causes / Solutions: The internal light does not illuminate. The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The refrigerator and the freezer do not cool well. The food inside the refrigerator is beginning to freeze.
Assistance 195066963.00 09/2007 - Xerox Business Services Before calling for Assistance: Check if the malfunction can be solved on your own (see Troubleshooting). If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre model serial number GB Communicating: type of malfunction appliance model (Mod.) serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment.