Instructions for use WASHING MACHINE Contents GB English,1 DE Deutsch,37 F Français,13 I Italiano,25 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine, 4-5 Control panel Display Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options IWE 8168 Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system
Installation GB This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating.
Do not use extension cords or multiple sockets. Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; GB The cable should not be bent or compressed. The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the washing machine Control panel GB TEMPERATURE ON/OFF Button button OPTION buttons with indicator lights START/PAUSE button with indicator light DISPLAY Detergent dispenser drawer WASH CYCLE knob SPIN SPEED DELAYED START Button Button Detergent dispenser drawer: used to dispense detergents and washing additives (see Detergents and laundry). : press to set a delayed DELAYED START button start time for the selected wash cycle. The delay time will be shown on the display.
Display GB B A C The display is useful when programming the machine and provides a great deal of information. The duration of the available programmes and the remaining time of a running cycle appear in section A; if the DELAY START option has been set, the countdown to the start of the selected programme will appear.
Running a wash cycle GB 1. SWITCH THE MACHINE ON. Press the button; the START/PAUSE indicator light will flash slowly in a green colour. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes on the following page. 3. MEASURE OUT THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in "Detergents and laundry". 4. CLOSE THE DOOR. 5.
Wash cycles and options Wash cycles Table of wash cycles Description of the wash cycle GB Detergents Max. load (kg) Max. Max. Cycle temp. speed duration Fabric PreMini Eco (°C) (rpm) Normal Wash Bleach Load Time softener wash Daily 1 Cotton with prewash: extremely soiled whites. 2 Cotton: extremely soiled whites. 2 Cotton (2): heavily soiled whites and delicate colours. 3 Cotton: heavily soiled whites and resistant colours. 4 Coloured Cottons (3): lightly soiled whites and delicate colours.
Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Do not use hand washing detergents because these create too much foam. Open the detergent 4 dispenser drawer and pour in the detergent or washing additive, as 3 follows.
Precautions and tips This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. Opening the porthole door manually General safety This appliance was designed for domestic use only. The washing machine must only be used by adults, in accordance with the instructions provided in this manual.
Care and maintenance GB Cutting off the water and electricity supplies Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see Assistance), make sure that the problem cannot be not solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. The appliance is not plugged into the socket fully, or is not making contact. There is no power in the house. The wash cycle does not start. The washing machine door is not closed properly.
Service Before calling for Assistance: Check whether you can solve the problem alone (see Troubleshooting); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised technicians. Have the following information to hand: the type of problem; the appliance model (Mod.); the serial number (S/N).
Mode demploi LAVE-LINGE Sommaire FR Français FR Installation, 14-15 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Description du lave-linge, 16-17 Bandeau de commandes Écran Comment faire un cycle de lavage, 18 Programmes et fonctions, 19 Tableau des programmes Fonctions de lavage IWE 8168 Produits lessiviels et linge, 20 Tiroir à produits lessiviels Triage du linge Programmes spéciaux Système déquilibrage de la charge Précautions e
Installation FR Conserver ce mode demploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce quil suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. Une bonne mise à niveau garantit la stabilité de lappareil et évite quil y ait des vibrations, du bruit et des déplacements en cours de fonctionnement.
Raccordement du tuyau de vidange 65 - 100 cm Raccorder le tuyau dévacuation, sans le plier, à un conduit dévacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; Nutiliser ni rallonges ni prises multiples. FR Le câble ne doit être ni plié ni trop écrasé. Le câble dalimentation ne doit être remplacé que par des techniciens agréés. Attention! Nous déclinons toute responsabilité en cas de non-respect des normes énumérées ci-dessus.
Description du lave-linge FR Bandeau de commandes Touche Touche TEMPÉRATURE MARCHE/ARRÊT Touches avec voyants FONCTION Touche avec voyant MISE EN MARCHE/PAUSE Écran Tiroir à produits lessiviels Bouton PROGRAMMES Touche ESSORAGE Touche DÉPART DIFFÉRÉ Tiroir à produits lessiviels: pour charger les produits lessiviels et les additifs (voir Produits lessiviels et linge). : appuyer sur cette Touche DÉPART DIFFÉRÉ touche pour sélectionner un départ différé pour le programme choisi.
Écran FR B A C L'écran est utile pour programmer la machine et fournit de multiples renseignements. La section A affiche la durée des différents programmes disponibles et, une fois le cycle lancé, le temps restant jusqu'à la fin du programme ; si un DÉPART DIFFÉRÉ a été sélectionné, le temps restant avant le démarrage du programme sélectionné est affiché.
Comment faire un cycle de lavage FR 1. METTRE L'APPAREIL SOUS TENSION. Appuyer sur la touche ; le voyant de MISE EN MARCHE/PAUSE passe au vert et clignote lentement. 2. CHARGER LE LINGE. Ouvrir la porte hublot. Charger le linge en faisant attention à ne pas dépasser la quantité indiquée dans le tableau des programmes de la page suivante. 3. DOSER LE PRODUIT LESSIVIEL. Sortir le tiroir et placer le produit lessiviel dans les bacs correspondants comme indiqué au paragraphe "Detersifs et linge". 4.
Programmes et fonctions Programmes Tableau des programmes Vitesse Detersivi Charge maxi (Kg) Temp. maxi Durée maxi.
Produits lessiviels et linge FR Tiroir à produits lessiviels Un bon résultat de lavage dépend aussi dun bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste lintérieur du lave-linge et pollue lenvironnement. Ne pas utiliser de lessives pour lavage à la main, elles moussent trop. Sortir le tiroir à produits lessiviels et verser la 4 lessive ou ladditif comme suit.
Précautions et conseils Ce lave-linge a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Ouverture manuelle de la porte hublot A défaut de pouvoir ouvrir la porte hublot à cause dune panne de courant pour étendre le linge, procéder comme suit : Sécurité générale Cet appareil est conçu pour un usage domestique.
Entretien et soin FR Coupure de larrivée deau et du courant Fermer le robinet de leau après chaque lavage. Cela réduit lusure de linstallation hydraulique du lave-linge et évite tout danger de fuites. Nettoyage de la pompe Le lave-linge est équipé dune pompe autonettoyante qui nexige aucune opération dentretien. Il peut toutefois arriver que de menus objets (pièces de monnaie, boutons) tombent dans la préchambre qui protège la pompe, placée en bas de cette dernière.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant dappeler le Service de dépannage (voir Assistance), contrôler sil ne sagit pas par hasard dun problème facile à résoudre à laide de la liste suivante. FR Anomalies: Causes / Solutions possibles: Le lave-linge ne sallume pas. La fiche nest pas branchée dans la prise de courant ou mal branchée. Il y a une panne de courant. Le cycle de lavage ne démarre pas. Le hublot nest pas bien fermé.
Assistance Avant dappeler le service après-vente: Vérifier si on ne peut pas résoudre lanomalie par ses propres moyens (voir Anomalies et Remèdes); Remettre le programme en marche pour contrôler si linconvénient a disparu; Autrement, contacter le Centre dAssistance technique agréé au numéro de téléphone indiqué sur le certificat de garantie. FR Ne jamais sadresser à des techniciens non agréés. Communiquer: le type de panne; le modèle de lappareil (Mod.); son numéro de série (S/N).
Istruzioni per luso LAVABIANCHERIA Sommario I Italiano I Installazione, 26-27 Disimballo e livellamento Collegamenti idraulici ed elettrici Primo ciclo di lavaggio Dati tecnici Descrizione della lavabiancheria, 28-29 Pannello di controllo Display Come effettuare un ciclo di lavaggio, 30 Programmi e opzioni, 31 Tabella dei programmi Opzioni di lavaggio IWE 8168 Detersivi e biancheria, 32 Cassetto dei detersivi Preparare la biancheria Programmi particolari Sistema bilanciamento del carico Precauzioni
Installazione I È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla lavabiancheria per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti. Leggere attentamente le istruzioni: ci sono importanti informazioni sullinstallazione, sulluso e sulla sicurezza. Disimballo e livellamento Disimballo 1. Disimballare la lavabiancheria. 2.
Collegamento del tubo di scarico 65 - 100 cm Collegare il tubo di scarico, senza piegarlo, a una conduttura di scarico o a uno scarico a muro posti tra 65 e 100 cm da terra; Non usare prolunghe e multiple. I Il cavo non deve subire piegature o compressioni. Il cavo di alimentazione deve essere sostituito solo da tecnici autorizzati. Attenzione! Lazienda declina ogni responsabilità qualora queste norme non vengano rispettate.
Descrizione della lavabiancheria I Pannello di controllo Tasto ACCENSIONE/ SPEGNIMENTO Tasto TEMPERATURA Tasti e spie OPZIONE Tasto e spia AVVIO/PAUSA DISPLAY Cassetto dei detersivi MANOPOLA PROGRAMMI Cassetto dei detersivi: per caricare detersivi e additivi (vedi Detersivi e biancheria). : premere Tasto ACCENSIONE/SPEGNIMENTO brevemente il tasto per accendere o spegnere la macchina. La spia AVVIO/PAUSA che lampeggia lentamente di colore verde indica che la macchina è accesa.
Display I B A C Il display è utile per programmare la macchina e fornisce molteplici informazioni. Nella sezione A viene visualizzata la durata dei vari programmi a disposizione e a ciclo avviato il tempo residuo alla fine dello stesso; nel caso fosse stata impostata una PARTENZA RITARDATA, viene visualizzato il tempo mancante allavvio del programma selezionato.
Come effettuare un ciclo di lavaggio I 1. ACCENDERE LA MACCHINA. Premere il tasto ; la spia AVVIO/PAUSA lampeggerà lentamente di colore verde. relativa alla prima funzione selezionata lampeggerà e verrà attivata solo la seconda, la spia dell'opzione attivata si illuminerà. 2. CARICARE LA BIANCHERIA. Aprire la porta oblò. Caricare la biancheria facendo attenzione a non superare la quantità di carico indicata nella tabella programmi della pagina seguente. Le opzioni possono variare il carico 3.
Programmi e opzioni Programmi Tabella dei programmi Descrizione del Programma Velocità Detersivi Carico max. (Kg) Temp. max. Durata max.
Detersivi e biancheria I Cassetto dei detersivi Il buon risultato del lavaggio dipende anche dal corretto dosaggio del detersivo: eccedendo non si lava in modo più efficace e si contribuisce a incrostare le parti interne della lavabiancheria e a inquinare lambiente. Non usare detersivi per il lavaggio a mano, perché formano troppa schiuma. 4 2 3 Estrarre il cassetto dei detersivi e inserire il detersivo o ladditivo come segue.
Precauzioni e consigli La lavabiancheria è stata progettata e costruita in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Apertura manuale della porta oblò Nel caso non sia possibile aprire la porta oblò a causa della mancanza di energia elettrica e volete stendere il bucato, procedere come segue: Sicurezza generale Questo apparecchio è stato concepito esclusivamente per un uso di tipo domestico.
Manutenzione e cura I Escludere acqua e corrente elettrica Pulire la pompa Chiudere il rubinetto dellacqua dopo ogni lavaggio. Si limita così lusura dellimpianto idraulico della lavabiancheria e si elimina il pericolo di perdite. La lavabiancheria è dotata di una pompa autopulente che non ha bisogno di manutenzione. Può però succedere che piccoli oggetti (monete, bottoni) cadano nella precamera che protegge la pompa, situata nella parte inferiore di essa.
Anomalie e rimedi Può accadere che la lavabiancheria non funzioni. Prima di telefonare allAssistenza (vedi Assistenza), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. Anomalie: Possibili cause / Soluzione: La lavabiancheria non si accende. La spina non è inserita nella presa della corrente, o non abbastanza da fare contatto. In casa non cè corrente. Il ciclo di lavaggio non inizia. Loblò non è ben chiuso.
Assistenza Prima di contattare lAssistenza: Verificare se lanomalia può essere risolta da soli (vedi Anomalie e rimedi); Riavviare il programma per controllare se linconveniente è stato ovviato; In caso negativo, contattare il Numero Unico 199.199.199*. I Non ricorrere mai a tecnici non autorizzati. Comunicare: il tipo di anomalia; il modello della macchina (Mod.); il numero di serie (S/N).
Bedienungsanleitungen WASCHVOLLAUTOMAT INHALTSVERZEICHNIS DE Deutsch DE Installation 38-39 Auspacken und Aufstellen Wasser- und Elektroanschlüsse Erster Waschgang Technische Daten Beschreibung Ihres Waschvollautomaten, 40-41 Bedienblende Display Durchführung eines Waschprogramms, 42 Programme und Funktionen, 43 Programmtabelle Waschfunktionen IWE 8168 Waschmittel und Wäsche 44 Waschmittelschublade Vorsortieren der Wäsche Sonderprogramme Unwuchtkontrollsystem Vorsichtsmaßregeln und Hinweise 45 Allgem
Installation DE Es ist äußerst wichtig, diese Bedienungsanleitung sorgfältig aufzubewahren, um sie jederzeit zu Rate ziehen zu können. Sorgen Sie dafür, dass sie im Falle eines Umzugs oder einer Übergabe an einen anderen Benutzer das Gerät stets begleitet, damit auch der neue Inhaber die Möglichkeit hat, diese zu Rate zu ziehen.
Anschluss des Ablaufschlauches 65 - 100 cm Schließen Sie den Ablaufschlauch ohne ihn dabei abzuknicken an einen geeigneten Abfluss an. Die Mindestablaufhöhe beträgt 65 - 100 cm (gemessen vom Boden), oder hängen Sie diesen mittels des Schlauchhalters gesichert in ein Becken oder Wanne ein; Befestigen Sie diesen mittels des mitgelieferten Schlauchhalters z.B. an einen Wasserhahn (siehe Abbildung). Das freie Ablaufschlauchende darf nicht unter Wasser positioniert werden.
Beschreibung Ihres Waschvollautomaten DE Bedienblende Taste TEMPERATUR Tasten mit Kontrollleuchten Taste EIN/AUS FUNKTIONEN Taste mit Kontrollleuchte START/ PAUSE DISPLAY Waschmittelschublade Wählschalter PROGRAMMWAHL Waschmittelschublade: für Waschmittel und Zusätze (siehe Waschmittel und Wäsche). : Drücken Sie kurz auf die Taste, Taste EIN/AUS um das Gerät ein- bzw. auszuschalten. Die Kontrollleuchte START/PAUSE, die langsam grün blinkt, zeigt an, dass das Gerät eingeschaltet ist.
Display DE B A C Das Display dient nicht nur zur Programmierung des Gerätes, sondern liefert auch zahlreiche Informationen. Im Abschnitt A werden die Dauer der verschiedenen verfügbaren Programme sowie die Restzeit nach Zyklusstart angezeigt; wurde eine STARTZEITVORWAHL eingestellt, dann wird die bis zum Start des ausgewählten Programms verbleibende Zeit angezeigt.
Durchführung eines Waschprogramms DE 1. EINSCHALTEN DES GERÄTES. Drücken Sie auf die Taste ; die Kontrollleuchte START/PAUSE blinkt langsam grün. 2. EINFÜLLEN DER WÄSCHE. Öffnen Sie die Gerätetür. Füllen Sie die Wäsche ein. Achten Sie hierbei bitte darauf, die in der Programmtabelle (auf der nächsten Seite) angegebene Wäschemenge nicht zu überschreiten. 3. DOSIERUNG DES WASCHMITTELS.
Programme und Funktionen Waschprogramme Programmtabelle Beschreibung des Programms Max. Max. BeladungsMax. Waschmittel Schleudermenge (kg) ProgramTempeGeschwinMini ratur VorHaupt- Bleich- WeichEco mdauer digkeit Normal Bela(°C) Time wäsche wäsche mittel spüler (U/min) dung Programme für die tägliche Wäsche (Daily) 2 Baumwolle (1): stark verschmutzte Weiß- und farbechte Buntwäsche.
Waschmittel und Wäsche DE Waschmittel und Wäsche Ein gutes Waschergebnis hängt auch von einer korrekten Waschmitteldosierung ab: Eine zu hohe Dosierung bedeutet nicht unbedingt reinere Wäsche, sie trägt nur dazu bei, die Maschineninnenteile zu verkrusten und die Umwelt zu belasten. Verwenden Sie keine Handwaschmittel, sie verursachen eine zu hohe Schaumbildung.
Vorsichtsmaßregeln und Hinweise Der Waschvollautomat wurde nach den strengsten internationalen Sicherheitsvorschriften entworfen und gebaut. Nachstehende Hinweise werden aus Sicherheitsgründen geliefert und sollten aufmerksam gelesen werden. Manuelles Öffnen der Gerätetür Allgemeine Sicherheit Dieses Gerät wurde ausschließlich für den Einsatz im privaten Haushalt konzipiert. Der Waschvollautomat darf nur von Erwachsenen und gemäß den Anleitungen dieses Handbuchs bedient werden.
Reinigung und Pflege DE Abstellen der Wasser- und Stromversorgung Drehen Sie den Wasserhahn nach jedem Waschvorgang zu. Hierdurch wird der Verschleiß der Wasseranlage verringert und Wasserlecks vorgebeugt. Ziehen Sie den Netzstecker aus der Steckdose, bevor Sie Ihren Waschvollautomaten reinigen. Reinigung des Gerätes Die Gehäuseteile und die Teile aus Gummi können mit einem mit warmer Spülmittellauge angefeuchteten Tuch gereinigt werden.
Störungen und Abhilfe Bei Funktionsstörung: Bevor Sie sich an den Technischen Kundendienst wenden (siehe Kundendienst), vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. Störungen: Mögliche Ursachen / Lösungen: Der Waschvollautomat schaltet sich nicht ein. Der Stecker steckt nicht in der Steckdose, oder nicht so, dass der Kontakt hergestellt wird. Der Strom ist ausgefallen.
Kundendienst 195072076.02 11/2008 - Xerox Business Services Bevor Sie sich an den Kundendienst wenden: Sollten einige Kontrollen vorab selbst durchgeführt werden (siehe Störungen und Abhilfe); Starten Sie daraufhin das Programm erneut, um sicherzustellen, dass die Störung auch wirklich behoben wurde; Ist dies nicht der Fall, dann kontaktieren Sie den autorisierten Kundendienst unter der auf dem Garantieschein befindlichen Telefonnummer.