Instruction for Use

GB
7
Wash cycles and options
Wash options
Selecting this option enables you to suitably adjust drum rotation,
temperature and water to a reduced load of lightly soiled cotton and
synthetic fabrics (refer to the “Table of wash cycles”). “ ” enables
you to wash in less time thereby saving water and electricity. We suggest
using a liquid detergent suitably measured out to the load quantity.
! It cannot be used with the 1, 2, 7, 8, 9, 10, 11, 12, 13, , ,
programmes.
Stain removal
This option is particularly useful for the removal of stubborn stains. Place
extra compartment 4 (supplied) into compartment 1.
When pouring in the bleach, be careful not to exceed the “max” level marked
on the central pivot (see figure).
To run the bleach cycle on its
own, pour the bleach into extra
compartment 4, set the “Rinse”
programme and activate the “Stain
removal” option.
To bleach during a wash cycle,
pour in the detergent and any fabric
softener you wish to use, set the
desired wash cycle and enable the
“Stain removal” option.
Table of wash cycles
The use of extra compartment 4 excludes the “Pre-wash” option.
! It cannot be used with the 1, 7, 8, 9, 10, 11, 12, 13, ,
programmes.
Extra rinse
By selecting this option, the efficiency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin.
! It cannot be used in conjunction with the 10, , programmes.
Easy iron
By selecting this function, the wash and spin cycles will be modified in
order to reduce the formation of creases. At the end of the cycle the
washing machine will perform slow rotations of the drum; the indicator
lights for the EASY IRON and START/PAUSE options will flash (the first
one green, the second orange).
To end the cycle, press the START/PAUSE button or the EASY IRON
button.
For the 8 wash cycle, the machine will end the cycle while the laundry
is soaking and the EASY IRON and START/PAUSE indicator lights will
flash. To drain the water so that the laundry may be removed, press the
START/PAUSE button or the EASY IRON button.
! This function may not be used in conjunction with wash cycles 7, 10,
11, 12, 13, , .
1
2
3
4
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Prewash Wash Bleach Fabric softener
Daily
1
Cotton with prewash: extremely soiled whites. 90° 1200
 
-

4,5 53 1,55 54 140
2
Cotton: extremely soiled whites. 90° 1200 -
  
4,5 53 1,50 55 120
2
Cotton (1-2): heavily soiled whites and resistant colours. 60° 1200 -
  
4,5 53 0,844 40 153
2
Cotton (2): lightly soiled whites and delicate colours. 40° 1200 -
  
4,5 53 0,74 55 147
3
Cotton: heavily soiled whites and resistant colours. 60° 1200 -
  
4,5 - - - 115
4
Coloured Cottons (3): lightly soiled whites and delicate colours. 40° 1200 -
  
4,5 53 0,54 43 78
5
Synthetics: heavily soiled resistant colours. 60° 800 -
  
2,5 44 0,70 40 99
5
Synthetics energetic (4): heavily soiled resistant colours. 40° 800 -
  
2,5 44 0,47 38 90
6
Synthetics: lightly soiled delicate colours. 40° 800 -
  
2,5 - - - 70
Special
7
Wool: for wool, cashmere, etc. 40° 800 -

-

1 - - - 55
8
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -

-

1 - - - 55
9 Jeans
40° 800 -

-

2,5 - - - 68
10
Express: to refresh lightly soiled garments quickly (not suitable for wool,
silk and clothes which require washing by hand).
30° 800 -

-

1,5 71 0,13 29 15
Sport
11 Sport Intensive
30° 600 -

-

2,5 - - - 83
12 Sport Light
30° 600 -

-

2,5 - - - 62
13 Special Shoes
30° 600 -

-

Max. 2
Pairs
- - - 53
Partial wash cycles
Rinse - 1200 - -
 
4,5 - - - 36
Spin - 1200 - - - - 4,5 - - - 16
Drain - 0 - - - - 4,5 - - - 2
The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 2 with a temperature of 60°C and 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used
for garments which can be washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value.
2) Long wash cycle for cottons: set wash cycle 2 with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.
4) Synthetic program along: set wash cycle 5 with a temperature of 40°C.