Instructions for use WASHING MACHINE Contents GB Installation, 2-3 GB English, 1 SK Slovensky,13 RO Română,25 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 4 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5 General safety Disposal IWSNC 51
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating.
Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; ! Do not use extension cords or multiple sockets. ! The cable should not be bent or compressed. ! The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. To access the pre-chamber: 1. using a screwdriver, remove the cover panel on the lower front part of the washing machine (see figure); • Unplug the washing machine when cleaning it and during all maintenance work.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. General safety • This appliance was designed for domestic use only.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights FUNCTION ON/OFF button buttons with indicator lights TEMPERATURE Detergent dispenser drawer knob Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.
Indicator lights The indicator lights provide important information. This is what they can tell you: Delayed start If the DELAY TIMER function has been activated (see “Personalisation”), after the wash cycle has been started the indicator light corresponding to the selected delay period will begin to flash: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles Residual dampness % Energy consumption kWh Total water lt Cycle duration 46 47,5 66 - 150’ 140’ 85’ 145’ 130’ 220’ 215’ 170’ 2,5 - - - 65’ 55’ 70’ 1,5 - - - 15’ 2,5 - - - 85’ 60’ Max. 2 pairs - - - 55’ 5 - - - 36’ - - 5 - - - 10’ - - 5 - - - 3’ Bleach 12 13 0,70 0,89 0,95 - Wash 11 44 62 62 - Max. speed (rpm) Fabric softener 8 9 10 5 Detergents Max. temp. (°C) Prewash 1 2 3 4 5 6 6 7 Max.
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. ! Do not use hand washing detergents because these create too much foam. ! Use powder detergent for white cotton garments, for prewashing, and for washing at temperatures over 60°C.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact. • There is no power in the house. The wash cycle does not start. • • • • • The washing machine door is not closed properly.
Service GB Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Návod na použitie PRÁČKA Obsah SK Slovensky SK Inštalácia, 14-15 Rozbalenie a vyrovnanie do vodorovnej polohy Pripojenie k elektrickej a k vodovodnej sieti Prvý prací cyklus Technické údaje Údržba a starostlivosť, 16 Uzavretie prívodu vody a vypnutie elektrického napájania Čistenie práčky Čistenie dávkovača pracích prostriedkov Starostlivosť o dvierka a bubon Čistenie čerpadla Skontrolujte prítokovú hadicu vodu Opatrenia a rady, 17 IWSNC 51051X9 Základné bezpečnostné pokyny Likvidácia Popis práčky
Inštalácia SK ! Je veľmi dôležité uschovať tento návod kvôli prípadnému ďalšiemu použitiu. V prípade predaja, darovania alebo presťahovania práčky sa uistite, že zostane uložený v jej blízkosti, aby mohol poslúžiť novému majiteľovi pri oboznámení sa s činnosťou a s príslušnými upozorneniami. ! Pozorne si prečítajte uvedené pokyny: obsahujú dôležité informácie, týkajúce sa inštalácie, použitia a bezpečnosti pri práci. Rozbalenie a vyrovnanie do vodorovnej polohy Rozbalenie 1. Rozbaľte práčku. 2.
Pripojenie vypúšťacej hadice 65 - 100 cm Pripojte vypúšťaciu hadicu, bez toho aby ste ju ohli, k odpadovému potrubiu alebo k odpadu v stene, ktorý sa nachádza od 65 do 100 cm nad zemou; alebo ju uchyťte k okraju umývadla či vane, a pripevnite vodiaci držiak z príslušenstva ku kohútu (viď obrázok). Voľný koniec vypúšťacej hadice nesmie zostať ponorený do vody.
Údržba a starostlivosť SK Uzavretie prívodu vody a vypnutie elektrického napájania • Po každom praní uzatvorte prívod vody. Týmto spôsobom sa znižuje opotrebenie rozvodu vody zariadenia a znížuje sa nebezpečenstvo úniku vody. • Pred zahájením čistenia práčky a počas údržby je potrebné vytiahnuť zástrčku prívodného kábla zo zásuvky. Čistenie práčky Vonkajšie časti a časti z gumy môžu byť čistené utierkou navlhčenou vo vlažnej vode a saponáte. Nepoužívajte rozpúšťadlá alebo abrazívne prostriedky.
Opatrenia a rady ! Práčka bola navrhnutá a vyrobená v súlade s platný- mi medzinárodnými bezpečnostnými predpismi. Tieto upozornenia sú uvádzané z bezpečnostných dôvodov a je potrebné si ich pozorne prečítať. Základné bezpečnostné pokyny • Toto zariadenie bolo navrhnuté výhradne na použitie ako spotrebič. Symbol “prečiarknutej popolnice” na výrobku Vás upozorňuje na povinnosť odovzdať zariadenie po skončení jeho životnosti do oddeleného zberu.
Popis práčky a zahájenie pracieho programu SK Ovládací panel Kontrolky POSTUPU PRACIEHO CYKLU/ ONESKORENÉHO ŠTARTU Tlačidlo ON/OFF TEPLOTY Otočný ovládač PROGRAMOV Dávkovač pracích prostriedkov: slúži na dávkovanie pracích prostriedkov a prídavných prostriedkov (viď „Pracie prostriedky a prádlo“). Tlačidlo ON/OFF: slúži na zapnutie a vypnutie práčky. Otočný ovládač PROGRAMOV: pre nastavenie pracích programov. Počas pracieho programu zostane v rovnakej polohe.
Kontrolky Kontrolký sú zdrojom dôležitých informácií. Informujú o nasledujúcich skutočnostiach: Oneskorený štart Keď bola aktivovaná funkcia „Oneskoreného štartu“ (viď „Užívateľské nastavenia“), po zahájení pracieho programu začne blikať príslušná kontrolka zvoleného oneskorenia: Kontrolky prebiehajúcej fázy Po zvolení a zahájení požadovaného pracieho cyklu dôjde k postupnému rozsvecovaniu kontroliek informujúcich o jeho postupe.
Pracie programy 12 13 14 Sport Shoes 46 - 150’ 140’ 85’ 145’ 130’ 5 62 0,89 47,5 220’ 5 62 0,95 66 215’ 5 - - - 170’ - 1 2,5 - - - 65’ 55’ 70’ - - 1,5 - - - 15’ 600 600 - - 2,5 - - - 85’ 60’ 600 - - (Max. 2 páry.) - - - 55’ Max. nápln (kg) 0,70 - Max.
Užívateľské nastavenia Nastavenie teploty SK Otáčaním otočného ovládača TEPLOTY sa nastavuje teplota prania (viď Tabuľka programov). Teplota môže byť postupne znižovaná až po pranie v studenej vode ( ). Zariadenie automaticky zabráni nastaveniu vyššej teploty ako je maximálna teplota pre každý prací program. Nastavenie odstreďovania Otáčaním otočného ovládača ODSTREĎOVANIA sa nastavuje rýchlosť odstreďovania zvoleného pracieho programu.
Pracie prostriedky a prádlo SK Dávkovač pracích prostriedkov Dobrý výsledok prania závisí aj od správneho dávkovania pracieho prostriedku: použitie nadmerného množstva znižuje efektivitu prania a napomáha tvorbe vodného kameňa na vnútorných častiach práčky a zvyšuje znečistenie životného prostredia. ! Nepoužívajte pracie prostriedky určené na pranie v ru- kách, pretože spôsobujú tvorbu nadmerného množstva peny.
Poruchy a spôsob ich odstránenia Môže sa stať, že práčka nebude fungovať. Skôr, ako zatelefonujete na Servisnú službu viď „Servisná služba“) skontrolujte, či sa nejedná o problém ľahko odstrániteľný pomocou nasledujúceho zoznamu. Poruchy: Možné príčiny / Spôsob ich odstránenia: Pračku nie je možné zapnúť. • Zástrčka nie je zasunutá v elektrickej zásuvke, alebo nie je zasunutá dostatočne, aby došlo k spojeniu kontaktov. • V celom dome je vypnutý prúd. Nedochádza k zahájeniu pracieho cyklu.
Servisná služba SK Pred obrátením sa na Servisnú službu: • Skontrolujte, či nie ste schopní poruchu odstrániť sami (viď „Poruchy a spôsob ich odstránenia“); • Opätovne uveďte do chodu prací program, s cieľom overiť, či bola porucha odstránená; • V opačnom prípade sa obráťte na Centrum servisnej služby, na telefónnom čísle uvedenom na záručnom liste. ! Nikdy sa neobracajte so žiadosťou o pomoc na technikov, ktorí nie sú na vykonávanie tejto činnosti oprávnení.
Instrucţiuni de folosire MAŞINĂ DE SPĂLAT RUFE Sumar RO Română RO Instalare, 26-27 Despachetare şi punere la nivel Racorduri hidraulice şi electrice Primul ciclu de spălare Date tehnice Întreţinere şi curăţare, 28 Întreruperea alimentării cu apă şi curent electric Curăţarea maşinii de spălat Curăţarea compartimentului pentru detergent Îngrijirea uşii şi a tamburului Curăţarea pompei Controlarea furtunului de alimentare cu apă Precauţii şi sfaturi, 29 IWSNC 51051X9 Norme de protecţie şi siguranţă gen
Instalare RO ! Este important să păstraţi acest manual pentru a-l putea consulta în orice moment. În caz de vânzare, de cesiune sau de schimbare a locuinţei, acesta trebuie să rămână împreună cu maşina de spălat pentru a informa noul proprietar cu privire la funcţionare şi la respectivele avertismente. O nivelare precisă conferă stabilitate maşinii şi evită vibraţii, zgomote şi deplasări pe timpul funcţionării.
Conectarea furtunului de golire 65 - 100 cm ! Nu folosiţi prelungitoare şi prize multiple. RO Conectaţi furtunul de golire - fără a-l îndoi - la canalizare sau la racordul de golire prevăzut pe perete, la o înălţime de 65 100 cm de sol; ! Cablul nu trebuie să fie îndoit sau comprimat. Sprijiniţi-l de marginea căzii sau chiuvetei şi racordaţi şina de ghidare din dotare la robinet (a se vedea figura). Capătul liber al furtunului de golire nu trebuie să rămână cufundat în apă.
Întreţinere şi curăţare RO Întreruperea alimentării cu apă şi curent electric • Închideţi robinetul de apă după fiecare spălare. Se limitează astfel uzura instalaţiei hidraulice a maşinii de spălat şi se elimină pericolul scurgerilor. • Scoateţi stecherul din priza de curent atunci când curăţaţi maşina de spălat şi când se efectuează lucrări de întreţinere. Curăţarea maşinii de spălat Partea externă şi părţile din cauciuc pot fi curăţate cu o lavetă înmuiată în apă călduţă şi săpun.
Precauţii şi sfaturi ! Maşina de spălat a fost proiectată şi construită conform normelor internaţionale de protecţie. Aceste avertizări sunt furnizate din motive de siguranţă şi trebuie să fie citite cu atenţie. Norme de protecţie şi siguranţă generale • Acest aparat a fost conceput exclusiv pentru utilizarea în locuinţe unifamiliale.
Descrierea maşinii de spălat şi activarea unui program RO Panoul de control Indicatoare DESFĂŞURARE CICLU/PORNIRE ÎNTÂRZIATĂ START/PAUSE Tasta Taste cu led ON/OFF FUNCŢII Selector Selector PROGRAME Sertarul detergenţilor: pentru a introduce detergenţi sau aditivi (a se vedea “Detergenţi şi rufe albe”). Tasta ON/OFF: pentru a porni şi opri maşina. Selector PROGRAME: pentru a selecta programele. Pe durata desfăşurării programului selectorul rămâne în aceeaşi poziţie.
Indicatoare luminoase Ledurile furnizează informaţii importante.
Programe Durata ciclului de spãlare Umiditate rezidualã % 90° 90° 40° 60° 40° 60° 40° 20° 1000 1000 1000 1000 1000 1000 1000 1000 - 5 5 5 3 3 5 5 5 44 62 62 - 8 LÂNÃ: Pentru articole din lânã, caºmir. 9 MÃTASE /PERDELE: Pentru articolele din mãtase, viscozã, lenjerie.
Personalizare Reglarea temperaturii RO Rotind selectorul de TEMPERATURĂ se fixează temperatura de spălare (a se vedea Tabelul programelor). Temperatura poate fi redusă până la spălarea la rece ( ). Maşina va împiedica în mod automat de a alege o temperatură mai mare decât maxima admisă pentru fiecare program. Reglarea centrifugării Rotind selectorul de CENTRIFUGARE se stabileşte viteza de stoarcere pentru programul selectat.
Detergenţi şi rufe albe RO Compartimentul pentru detergenţi Un rezultat bun la spălare depinde şi de dozarea corectă a detergentului: excesul de detergent nu garantează o spălare mai eficientă, ci contribuie la deteriorarea părţilor interne ale maşinii de spălat şi la poluarea mediului înconjurător. ! Nu introduceţi în maşină detergenţii pentru spălarea manuală deoarece formează prea multă spumă.
Anomalii şi remedii Se poate întâmpla ca maşina de spălat să nu funcţioneze. Înainte de a apela serviciul de Service (a se vedea “Asistenţă”), verificaţi dacă nu este vorba de o problemă uşor de rezolvat: RO Anomalii: Cauze posibile / Rezolvare: Maşina de spălat nu porneşte. • Stecherul nu este introdus în priza de curent, sau nu face contact. • Aveţi o pană de curent la domiciliu. Ciclul de spălare nu porneşte. • • • • • Uşa nu este bine închisă. Tasta ON/OFF nu a fost apăsată.
Asistenţă 195131235.00 01/2015 RO Înainte de a lua legătura cu Service-ul: • Verificaţi dacă puteţi rezolva singuri problema (a se vedea “Anomalii şi remedii”); • Porniţi din nou programul pentru a controla dacă inconvenientul a fost eliminat; • În caz negativ, luaţi legătura cu asistenţa tehnică autorizată la numărul telefonic indicat pe certificatul de garanţie. ! Nu apelaţi niciodată la persoane neautorizate. Comunicaţi: • tipul de anomalie; • modelul maşinii (Mod.); • numărul de serie (S/N).