Instruction for Use

10
GB
400011208387
12/2017 - XEROX FABRIANO
Periodically, special products will need to
be used to clean the surface. First, remove
all food buildup or grease with a cleaning
scraper, e.g. (not supplied).
Clean the cooking surface when it is still
warm with a suitable cleaning product
(such as the one in the Solutions product
line available from any After-Sales Service
Centre) and paper towels. Then rub with a damp cloth and dry. Aluminum
foil, plastic items, objects made of synthetic material, sugar or foods with
a high sugar content that have melted onto the surface must be removed
immediatley with a scraper while the cooking surface is still hot.
Special cleaning products for ceramic glass
surfaces form a transparent protective
layer which ghts diry buildup. This also
protects the surface from damage caused
by food with a high sugar content. Do not
use abrasive sponges or cleaning products
under any circumstances. This holds true
for chemically aggressive cleaners, like
oven sprays and stain removers.
Gas tap maintenance
Over time, the taps may become jammed or dicult to turn. If this happens,
the tap must be replaced.
! This procedure must be performed by a qualied technician authorised
by the manufacturer.
Troubleshooting
It may happen that the appliance does not function properly or at all. Before
calling the service centre for assistance, check if anything can be done. First,
check to see that there are no interruptions in the gas and electrical supplies,
and, in particular, that the gas valves for the mains are open.
The burner does not light or the ame is not even around the burner.
Check whether:
• The gas holes on the burner are clogged.
• All the movable parts that make up the burner are mounted correctly.
• There are draughts near the appliance.
The ame dies in models with a safety device.
Check to make sure that:
• You pressed the knob all the way in.
• You keep the knob pressed in long enough to activate the safety device.
• The gas holes are not blocked in the area corresponding to the safety
device.
The burner does not remain lit when set to minimum.
Check to make sure that:
• The gas holes are not blocked.
• There are no draughts near the appliance.
• The minimum setting has been adjusted properly.
The cookware is unstable.
Check to make sure that:
• The bottom of the cookware is perfectly at.
• The cookware is positioned correctly at the centre of the burner.
• The pan support grids have been positioned correctly.