Instruction for Use

GB
25
! If the appliance is connected to liquid gas, the regulation
screw must be fastened as tightly as possible.
! Once this procedure is nished, replace the old rating
sticker with one indicating the new type of gas used. Stickers
are available from any of our Service Centres.
! Should the gas pressure used be different (or vary slightly)
from the recommended pressure, a suitable pressure
regulator must be tted to the inlet pipe (in order to comply
with current national regulations).
Electrical
connections
DATA PLATE
see data plate
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low
Voltage) and subsequent amendments
- 2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2009/142/EEC dated 30/11/09 (Gas) and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
Table 1 Liquid Gas Natural Gas
Burner Diameter Thermal Thermal By-pass Nozzle Flow* Thermal Nozzle Flow*
power power 1/100 1/100 (g/h) power 1/100 (l/h)
kW kW kW
(p.c.s.*) (p.c.s.*) (p.c.s.*)
(mm) Reduced Nominal (mm) (mm) *** ** Nominal (mm)
Supply pressures
Nominal (mbar)
Minimum (mbar)
Maximum (mbar)
28-30
20
35
37
25
45
20
17
25
Fast (R)
Reduced Fast (RR)
Semi Fast (S)
Auxiliary (A)
Triple Crown (TC)
100
100
75
55
130
0.70
0.70
0.40
0.40
1.50
3.00
2.60
1.65
1.00
3.30
39
39
28
28
61
86
80
64
50
65x2
218
189
120
73
240
214
186
118
71
236
3.00
2.60
1.65
1.00
3.60
132 (H3)
122 (H3)
96 (Z)
79 (6)
103x2
286
248
157
95
343
Double flame
(DCDR internal) (1)
30 0,30 0,90 27 44 65 64 0,90 74 86
Double
flame (1)
(DCDR
internal)
(DCDR
external
2 nozzle)
130 1,50 3,60
27 44
262 257 3,60
74
343
55 60x2 94x2
Burner and nozzle specifications (for 60 cm and 65 cm versions only)
(1) For single-control DRDA
(DCDR) burner only
(2) For dual-control DRDA
(DCDR) burner only
*
At 15°C and 1013,25 mbar - dry gas
**
Propane P.C.S. = 50.37 MJ/Kg
***
Butane P. C.S. = 49.47 MJ/Kg
Natural P.C.S. = 37.78 MJ/m³
Double Flame
(DCDR Internal) (2)
Double Flame
(DCDR External)
2 nozzle (2)
30
130
0.40
1.50
0.90
3.60
28
61
44
67x2
65
262
64
257
0.90
3.60
74
100x2
86
343