Instruction for Use

8
GB
Wash cycles
Table of wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash cycles
Description of the wash cycle
Max.
temp.
C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle duration
Prewash
Wash
Bleach
Fabric
softener
Daily Programs
1
Cottons with Pre-wash: extremely soiled whites. 90° 1200
-
8 53 2,72 95 190’
2
White Cottons: extremely soiled whites. 90° 1200 -
8 53 2,45 83 175’
Standard Cotton 60° (1): heavily soiled whites and resistant colours. 60° 1200 -
8 53 1,23 73 200’
Standard Cotton 40° (2): heavily soiled whites and delicate colours. 40° 1200 -
8 53 1,09 92 185’
5
Synthetics: heavily soiled resistant colours. 60° 800 -
4,5 46 1,03 60 115’
5
Synthetics (3): lightly soiled resistant colours. 40° 800 -
4,5 46 0,56 60 100’
6 Jeans
40° 800 -
-
4 - - - 80
7 Shirts
40° 600 -
2 - - - 70
8
Mix-Cool 30’: to refresh lightly soiled garments quickly (not suitable for wool, silk and
clothes which require washing by hand).
Cold
water
800 -
-
3 71 0,20 38 30’
9
Standard Cotton 20°: heavily soiled whites and delicate colours. 20° 1200 -
8 - - - 175’
Special
10
Wool: for wool, cashmere, etc. 40° 800 -
-
2 - - - 90
11
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
-
2 - - - 65
12 Duvets
30° 1000 -
-
3,5 - - - 120’
13 Outwear
30° 600 -
- - 2,5 - - - 60’
14 Sport Shoes
30° 600 -
-
Max.2
pairs
- - - 60
Partials
Rinse - 1200 - -
8 - - - 36
Spin + Drain - 1200 - - - - 8 - - - 16’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle
with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle
with a temperature of 40°C.
3) Synthetic program along: set wash cycle 5 with a temperature of 40°C.