Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents GB English Installation, 2 Positioning and connection Reversible doors Description of the appliance, 3-4 Control panel Overall view Start-up and use, 5-6-7 Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 8 NBAA 33 NF NX D (UK) Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Replacing the light bulb Pr
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. Reversible doors GB If it is necessary to change the direction in which the doors open, please contact the Technical Assistance Centre. Fitting a new plug IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE...
Description of the appliance Control panel REFRIGERATOR Temperature Adjustment GB ALARMS SUPER COOL CHILD LOCK REFRIGERATOR status bar FREEZER status bar SUPER FREEZE BOTTLE CHILL FREEZER Temperature Adjustment ECO ON/OFF It is possible to switch the whole product (both the refrigerator and freezer compartments) on by pressing this button. The red LED indicates that the product is switched off, while the green LED shows that it is operating.
Description of the appliance Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.
Start-up and use GB Starting the appliance ! After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should. Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it. The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on.
Chiller system Using the freezer to its full potential No Frost Adjust the temperature using the display. To freeze foods in safely and correctly, follow the instructions below: place the food in the FREEZER and STORAGE compartment, making sure that it does not come into contact with any food that has already been frozen; press the rapid-freezing SUPER FREEZE button (the corresponding LED lights up) and close the door.
GB Ice3 ice tray The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). 1. Pull out the tray by pushing it up. Check that the tray is ompletely empty and fill it with water through the opening provided. 2.
Maintenance and care Switching the appliance off Replacing the light bulb During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W). 1.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments. - 2002/96/CE..
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Malfunctions: GB Possible causes / Solutions: The display is completely switched off. The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The motor does not start. The appliance comes with a motor protection control (see Start-up and use). The display is on but it is dim.
Assistance Guarantee GB 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturers guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
After Sales Service GB No one is better placed to care for your Indesit appliance during the course of its working life than us the manufacturer. Essential Contact Information Indesit Service We are the largest service team in the UK and Ireland offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.indesitservice.co.
GB 14
GB 15
195070471.