Refrigerator Instructions for installation and use SA 300 I
GB 0-star refrigerator Instructions for installation and use To maintain the EFFICIENCY and SAFETY of this appliance, we recommend: - use only the MANUFACTURER Service - use only ORIGINAL Spare Parts
Safety - a good habit to get into. ATTENTION Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance. Your Refrigerator is built to International safety standards (EN60) ans has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimination of readio interference (EC directive 87/308 - 02.06.89). 8.
Installation Electrical Connection and Earthing To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly. Ventilation The compressor and condenser generate heat and, therefore, need to be ventilated properly. Rooms with less than perfect ventilation are not very suited for installation of the appliance.
Electrical connection Connect Blue wire to terminal marked “N” or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. Your appliance is now supplied with a 13 amp fused plug that can be plugged into a 13 amp socket for immediate use.
A closer look A Temperature regulation knob Use this knob to regulate the temperature of the refrigerator.
Setting up Your Appliance ATTENTION After transport stand the appliance upright and wait at least 3 hours before plugging the appliance into the mains to ensure proper performance. Use these average temperature settings to ensure optimum performance and to save energy. Before storing food in your refrigerator wipe the interior with a solution of warm water and bicarbonate of soda. After having plugged the appliance into the socket, make sure that the refrigerator light has turned on.
Energy Saving Tips - Install the Appliance Correctly - Keep the Door Closed This means that the appliance should be installed away from heat sources or direct sunlight in a well ventilated room. Open the refrigerator only when necessary; remember that every time you open the door most of the cold air will be lost. To bring the temperature back to the proper level, the motor must run for a considerable amount of time, consuming a substantial amount of energy.
Trouble shooting The appliance does not Work Check that: · The mains switch of your home is on; · The plug is inserted correctly in the socket; · The socket is working; to chek this connect the appliance to another socket in the room. If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre and inform them of: the type of problem, the abbreviation of the model name (Mod.
Reversing the door opening 1 2 3
4
Merloni Elettrodomestici Viale Aristide Merloni 47 60044 Fabriano Italy Tel +39 0732 6611 Fax +39 0732 662501 07/2004 - 195046338.00 - Xerox Business Services - DocuTech www.merloni.