Instruction for Use

EN
User manual
11
11. Programme End
• At the end of the cycle, the message is shown on
the display.
• The door can only be opened when the “Door open“
indicator light turns on.
• Turn the programme selector to the “O“ position and
close the water tap.
• Open the lid and drum and unload the machine.
• Leave the Door open for some time to allow the
interior of the machine to dry.
After about a quarter of an hour, the washing machine
will switch o completely to save energy.
INDICATORS
Washing phase indicator
This indicator shows the current programme phase, running from left to right through
prewash, wash, rinse and spin/drain. The illuminated indicator light shows which phase
is in progress.
Door open
This indicator will light up
• Before starting and after the end of a programme
• The indicator lights to show that the lid can be opened
Water tap closed
Failure: Water tap closed
• No or not sucient inlet water.
Clean pump
Failure: Clean pump
• Water cannot be drained; water lter might be blocked
Call Service
Failure: Call After-sales service
• Refer to Troubleshooting section
• If the indicator persist, call After-sales service
FreshCare
This indicator will light up
• when FreshCare option is in progress
Detergent overdosage
This indicator will light up
• At the end of the programme if you used too much detergent. Use less detergent
next time.
• If the symbol lights up and the display shows “Fod“, too much foam interrupted the wash
process; refer to the “TROUBLESHOOTING GUIDE“.
HINTS AND TIPS
RULES FOR SEPARATING LAUNDRY
• Fabric type / indications on label (cotton, mixed bres,
synthetic, wool, handwash items)
• Colour (separate coloured garments from whites, wash
new coloured items separately)
• Size (wash items of dierent sizes in the same load to
improve washing ecacy and weight distribution in the
drum)
• Delicates (place small items – such as nylon stockings –
and garments with clasps – such as braziers – in a laundry
bag or in a pillow case with a zip).
WASH SYMBOLS ON GARMENT LABELS
The value given in the tub symbol is the maximum
temperature possible for washing the garment.
Normal mechanical action
Reduced mechanical action
Much reduced mechanical action
Hand wash only
Do not wash
CLEAN THE WATER FILTER REGULARLY
• This is needed to prevent the lter from blocking and
preventing the water from draining correctly.
SAVING ENERGY AND PROTECTING THE
ENVIRONMENT
• Keeping within the load limits indicated in the
“PROGRAMME CHART“ will optimise energy, water and
detergent consumption and reduce washing times.
• Do not exceed the detergent quantities recommended by
the detergent manufacturer.
• Save energy by using a 60 °C instead of a 95 °C wash
programme, or by using a 40 °C instead of a 60 °C wash
programme. We recommend using the “eCotton “ the
60 °C programme for cotton garments, which is longer,
but uses less energy.
• To save energy and time when washing, select highest
spin speed available for the programme to reduce the
residual water remaining in the garments at the end of the
wash cycle.
• Pretreat any stains with an appropriate stain remover,
or else dampen any dried-on stains with water prior
to washing, as this will reduce the need to use a high
temperature wash programme.
• Use the “Colours 15°“ programme for lightly soiled
coloured garments; this will reduce the amount of energy
used to heat the water.
Vymazať Stlpec so symbolmi
ak su texty!