Instruction for Use

User manual
18
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the lid or panel.
1. Pull out the mains plug, and close the water tap.
2. Make sure that the drum and lid are properly closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and x them so that they cannot
get damaged during transport.
4. Fix the transport bracket again for transportation. (see
“Installation guide“ last step)
5. Transport the washing machine upright.
Important: Do not transport the washing machine without
having xed the transport bracket. (see “Installation guide“)
AFTERSALES SERVICE
BEFORE CALLING THE AFTERSALES SERVICE
1. See if you can solve the problem by yourself with the help
of the suggestions given in the TROUBLESHOOTING
2. Switch the appliance o and back on again to see if the
fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL
OCCURS, GET IN TOUCH WITH THE NEAREST
AFTERSALES SERVICE
To receive assistance, call the number shown on the warranty
booklet or follow the instructions on the website
www .whirlpool. eu
When contacting our Client After-Sales service, always
specify:
• a brief description of the fault;
• the type and exact model of the appliance (xxxx)
• the service number (75xxxxxxxxxx).
• your full address;
• your telephone number.
SERVICE
xxxx
I. C. 75xxxxxxxxxx
If any repairs are required, please contact an authorised after-
sales service (to guarantee that original spare parts will be
used and repairs carried out correctly).