Instruction for Use

GB
19
Dryer Description
Control panel
The front The back
Control Panel
Drum
Air Intake Vent
Model & Serial
numbers
Filter
The Drying Guide allows you to consult a user
friendly table of fabric types and load capacities.
The TIMER knob (Départ Différé) sets a delay on the
dryer’s start time. Rotate it clockwise until you reach
the number of hours you want to delay the start time:
If you have gone too far, turn the knob counter-clockwise
(see Start and Programmes).
The PROGRAMMES knob sets the programme: rotate
it clockwise, never counter-clockwise, until the
indicator is pointing to the programme you want to
select (see Start and Programmes).
The START button (Départ) begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: LOW heat (Délicat)
IN: HIGH heat (Intensif)
The ALARM buzzer signals the end of a drying cycle.
IN: Buzzer ON (Sonnerie)
OUT: Buzzer OFF
The ACTIVE (Marche) indicator light signals that your
dryer is in use. This light will glow when the START
button is pressed. It will remain on until the door is
opened or the power is turned off. This light will be on
during a delayed start programme.
Vent Tube fitted here
Caution: Hot!
Rating plate
Drying Guide
PROGRAMMES
Knob
TIMER
Knob
START
Button
Indicator
ACTIVE
Light
HEAT
Button
ALARM
Button