Operating Instructions FREEZER Contents GB English, 1 Installation, 2-4 Positioning and connection Reversible doors Description of the appliance, 5 Overall view Start-up and use, 6 Starting the appliance Using the freezer to its full potential Maintenance and care, 7 Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance TZA 1 TZA 1 S Precautions and tips, 8 General safety Disposal Respecting and conserving the environment Troubleshooting, 9 A
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Fitting a new plug GB IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow Blue Brown - Earth - Neutral - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: - Connect Green and Yellow wire to terminal marked or coloured Green and Yellow. 'E' or - Connect Brown wire to terminal marked 'L' or coloured red or brown.
GB Reversible doors Warning: Before attempting to remove the door, switch off the electrical supply and pull out the mains plug. It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated containers whilst carrying out this operation. You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original packaging). Remove the door 1. Lay down the appliance on its back. 2.
Description of the appliance Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. FAST FREEZE Indicator light POWER Indicator light TEMPERATURE CONTROL Knob WARNING Indicator light Flap FREEZING and STORAGE compartment STORAGE compartment Levelling FEET Varies by number and/or position.
Start-up and use GB Starting the appliance ! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. 1. Insert the plug into the socket and ensure that the green POWER indicator light illuminates (the TEMPERATURE CONTROL knob must not be on 0). 2.
Maintenance and care Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on “0” (appliance off) to eliminate all electrical contact. Cleaning the appliance • The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE..
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Malfunctions: Possible causes / Solutions: The green POWER indicator light does not illuminate. • The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The indicator lights are on but the light is dim. • Pull out and reverse the plug before putting it back in the socket.
Assistance Before calling for Assistance: • Check if the malfunction can be solved on your own (see Troubleshooting). • If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre model serial number GB Communicating: • type of malfunction • appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment. Mod. RG 2330 220 - 240 V- TI 50 Hz Cod.
GB 11
195051960.