USER INSTRUCTION BOOK -----------------------------------------INDESIT WASHING MACHINES WG1033TPG WG1034TPG WG1130TPG
Thank you for choosing an Indesit product. This washer is reliable and easy to use. We suggest you read your owner's manual carefully. This will help you become familiar with your washer and its functions in order to obtain years of trouble free performance. Saves while it washes The double action wash penetrates so deeply that at just 60°C you obtain the same results you would normally obtain at 90°C with a traditional washer.
Overview G F E C D B A A. Programme selector F. Anti-crease button Use this dial to select one of the 15 wash programmes available for all your laundry requirements (see programme table on page 5). Remember that this dial should be turned in a clockwise direction and only when the machine is off. This function interrupts the cycle so that the laundry is left soaking in water before the spin cycle.
Using your washer Preparing your laundry.... Divide your laundry by fabric and colour fastness. Wash white and coloured items separately. Remember to empty pockets, removing especially those small items like coins, paper, pins and badges that might jam the pump. Fasten or remove loose buttons and fasten zippers. Turn shirts inside out for better results.
Detergents and fabric softener Never fill compartment 3 above the grid. Use compartment 2 for liquid detergent, filling the compartment just before you start the washer. Remember that liquid detergent is ideal for wash cycles with temperatures up to 60°C and for the programmes with no prewash cycle. Special containers are available for liquid and powder detergents. Fill the container and place in the drum with the laundry, following the instructions shown on the detergent packet.
Selecting the programmes The description of the wash programme by type of fabric is shown on the detergent dispenser. Type of Fabric & How Dirty Cycle Knob Temp. Knob Pre-wash Wash Detergent Detergent Softener Description of Wash Cycle Extremely dirty whites (sheets, tablecloths, etc.) 1 MAX ◆ ◆ ◆ Warm prewash, wash at 90°C, rinses, intermediate and final spins. Very dirty whites (sheets, tablecloths, etc.) 2 MAX ◆ ◆ Wash at 90°C, rinses, intermediate and final spins.
Washing tips Stain removal What not to wash in your appliance? The most common stains will disappear during the wash. If they are particularly stubborn, soak the garment in water and rub a little detergent onto the stain before putting it in the washing machine. Greasy marks (especially old ones) need treating with a stainremover. Be careful not to mark the fabric with remover.
Energy saving hints - Try to wash complete laundry loads: this saves unnecessary consumption of water and energy. - Select the right programme for your laundry: this will obviously depend on the type of fabric and how soiled your laundry is; we recommend the use of programmes without prewash which will save you time, water and energy. The prewash cycle should in fact be used only for heavily soiled, cotton fabrics.
Trouble shooting If the machine does not seem to be working properly before calling the service engineer there are a number of things you can check. Perhaps you have forgotten to push in a button or you are not using the machine properly. Excessive formation of suds.
Installation Transit packing After removing the packing, check the appliance for damage. If you have any doubts do not use the washer and call a qualified technician. Keep the packaging components (plastic bags, polyester foam, nails etc.) out of the reach of children since they could be dangerous. N.B. Part A, lightblue in colour (Fig. 2) should not be removed. The interior of the washer, has an oscillating unit which is fixed on the back by 3 screws during transport (fig. 1).
Electrical connection (figure 8) Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below. WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. Replacing the fuse: When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover refitted.
Replacing the power supply cord The power supply cord is specifically for this washing machine and is only available from our authorised Technical Assistance Service Centres. - Move the upper part of the cord lead slightly away from the back panel, pull the power supply cable upwards and then remove it (Fig. 11). To replace it, follow the instructions below: To connect the new power supply cable, do the reverse.
