Instructies voor het gebruik WASMACHINE Inhoud NL Nederlands,1 GB English,13 NL Installatie, 2-3 Uitpakken en waterpas zetten, 2 Water- en elektrische aansluiting, 2-3 Eerste wasprogramma, 3 Technische gegevens, 3 Beschrijving van de wasmachine, 4-5 Bedieningspaneel, 4 Controlelampjes, 5 Start en programma's, 6 In het kort: een programma starten, 6 Tabel van de programma's, 6 Persoonlijk instellen, 7 WIL 12 Instellen van de temperatuur, 7 Instellen van de centrifuge, 7 Functies, 7 Wasmiddel en wa
Installatie Het is belangrijk dit boekje te bewaren zodat u het kunt raadplegen wanneer u maar wilt. In het geval dat u de machine verkoopt, of u verhuist, moet het boekje bij de machine blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan leren kennen. NL Een correcte waterpas geeft de machine stabiliteit en vermijdt trillingen, lawaai en het zich verplaatsen gedurende het functioneren van de machine.
Aansluiting van de afvoerbuis NL Het snoer mag niet in bochten of geknikt liggen. Installatie 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen 65 en 100 cm van de grond af; Gebruik geen verlengsnoeren of dubbelstekkers. De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant is niet aansprakelijk wanneer deze normen niet gerespecteerd zijn.
Beschrijving van de wasmachine Bedieningspaneel NL FUNCTIE knoppen Controlelampjes Controlelampje AAN/DEUR GEBLOKKEERD AAN/UIT knop PROGRAMMA knop Wasmiddellaatje START/RESET knop CENTRIFUGE knop Wasmiddellaatje: voor wasmiddel en verdere toevoegingen (zie blz. 8). Controlelampjes: voor het volgen van het verloop van het wasprogramma. Als de functie Delay Timer is ingesteld, wordt de resterende tijd aangegeven tot het starten van het programma (zie blz. 5).
Controlelampjes Uitgestelde start ingesteld: Als de functie Delay Timer is geactiveerd (zie blz. 7), nadat het programma is gestart, gaat het controlelampje dat bij de uitgestelde start hoort knipperen: NL Installatie De controlelampjes geven belangrijke informatie. Ze geven aan: Fase die bezig is: Gedurende het verloop van het wasprogramma gaan de controlelampjes een voor een aan om aan te tonen met welk programmaonderdeel de machin bezig is: Voorwas Was Beschrijving Spoelen Centrifugeren N.B.
Start en Programma's In het kort: een programma starten NL 6. Giet het wasmiddel en verdere toevoegingen in het laatje (zie blz. 8). 7. Start het programma met de START/RESET knop. Voor het annuleren houdt u de START/RESET knop minstens 2 seconden ingedrukt. 8. Aan het einde van het programma gaat het controlelampje AAN/DEUR GEBLOKKEERD knipperen hetgeen betekent dat de deur geopend kan worden. Haal het wasgoed eruit en laat de deur op een kier staan zodat de trommel kan drogen. .
Persoonlijk instellen C Instellen van de temperatuur Door aan de TEMPERATUUR-knop te draaien stelt u de temperatuur van het wassen in (zie Tabel van de programma's op blz. 6). De temperatuur kan verlaagd worden tot aan koud ( ). NL Installatie Instellen van de centrifuge Beschrijving Door aan de CENTRIFUGE-knop te draaien stelt u de snelheid van de centrifuge van het gekozen programma in.
Wasmiddel en wasgoed NL Wasmiddellaatje Prepareren van het wasgoed Een goed resultaat van de was hangt ook af van een juiste dosis wasmiddel: te veel maakt het wassen niet beter en blijft in het wasgoed hangen terwijl het slecht is voor het milieu. Verdeel het wasgoed volgens: - het soort stof / het symbool op het etiket. - de kleuren: scheid gekleurd goed van de witte was. Maak de zakken leeg en controleer de knopen.
Voorzorgsmaatregelen en raadgevingen Algemene veiligheid Dit apparaat is gemaakt voor huishoudelijk gebruik, niet-professioneel, en zijn functies mogen niet veranderd worden. Raak de machine niet aan als u blootsvoets bent of met natte of vochtige handen of voeten. Open het wasmiddellaatje niet terwijl de machine in werking is. Forceer nooit de deur: het veiligheidsmechanisme, dat tegen per ongeluk openen beschermt, kan beschadigd worden.
Onderhoud NL Afsluiten van water en stroom Reinigen van de pomp Doe de kraan dicht na iedere wasbeurt. Hiermee reduceert u de kans op lekkage. De wasmachine is voorzien van een zelfreinigende pomp en hoeft dus niet te worden schoongemaakt. Het kan echter gebeuren dat kleine voorwerpen (geldstukken, knopen) in het voorvakje terecht komen dat de pomp beschermt en zich aan de onderkant bevindt.
Storingen en oplossingen Het kan gebeuren dat de machine niet werkt. Voordat u de installateur opbelt (zie blz. 12), controleert u of het een storing betreft die gemakkelijk te verhelpen is met behulp van de volgende lijst. De watertoevoerslang is niet aangesloten aan de kraan. De slang ligt gekneld. De kraan is niet open. In huis mankeert het water. Er is geen voldoende druk. De START/RESET knop is niet ingedrukt. De wasmachine blijft water aan- en afvoeren.
Service Voordat u er de installateur bijhaalt: Kijk eerst even of u het probleem zelf kunt oplossen (zie blz. 11); Start het programma om te controleren of de storing is verholpen; Is dit niet het geval dan neemt u contact op met de bevoegde dichtsbijzijnde Technische Dienst via het telefoonnummer dat op het garantiebewijs/gebruiksaanwijzing staat. NL Nooit een niet-bevoegde installateur erbij halen. Service Vermeld: het soort storing; het model van de machine (Mod.
Instructions for use WASHING MACHINE Contents GB English GB Installation, 14-15 Unpacking and levelling, 14 Electric and water connections, 14-15 The first wash cycle, 15 Technical details, 15 Washing machine description, 16-17 Control panel, 16 Leds, 17 Starting and Programmes, 18 Briefly: how to start a programme, 18 Programme table, 18 Personalisations, 19 WIL 12 Setting the temperature, 19 Setting the spin speed, 19 Functions, 19 Detergents and laundry, 20 Detergent dispenser, 20 Bleach cycle,
Installation GB Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Read these instructions carefully: they contain vital information on installation, use and safety.
Do not use extensions or multiple sockets. Connecting the drain hose The power supply cable must never be bent or dangerously compressed. The power supply cable must only be replaced by an authorised serviceman. GB Installation 65 - 100 cm Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; Warning! The company denies all liability if and when these norms are not respected.
Washing machine description Control panel GB FUNCTION Buttons Leds ON-OFF/ DOOR ON-OFF LOCK Button Led PROGRAMME Knob Detergent dispenser START/RESET Button TEMPERATURE SPIN SPEED Knob Knob Detergent dispenser: to add detergent and fabric softener (see page 20). TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 19). LEDS: to find out which wash cycle phase is under way.
Leds Delay set: If the Delay Timer function has been enabled (see page. 19), once you have started the programme, the LED corresponding to the delay set will begin to flash: Prewash Wash Rinse Note: during draining, the LED corresponding to the Spin cycle phase will be turned on. Detergents Once the set delay is complete, the flashing LED will turn off and the programme set will start.
Starting and Programmes Briefly: starting a programme GB 6. Add the detergent and any fabric softener (see page 20). 7. Start he programme by pressing the START/RESET button. To cancel it, keep the START/RESET button pressed for at least 2 seconds. 8. When the programme is finished, the ON-OFF/ DOOR LOCK Led will flash to indicate that the appliance door can be opened. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly. Turn the washing .
Personalisations Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18). The temperature can be lowered, or even set to a cold wash ( ). GB Installation Setting the spin speed . The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each programme. Programmes Functions To enable a function: 1.
Detergents and laundry GB Detergent dispenser Preparing your laundry Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. Divide your laundry according to: - the type of fabric/the symbol on the label. - the colours: separate coloured garments from whites. Empty all pockets and check for loose buttons.
Precautions and advice General safety This appliance has been designed for nonprofessional, household use and its functions must not be changed. Never touch the washing machine when barefoot or with wet or damp hands or feet. Do not open the detergent dispenser while the appliance is in operation. Do not touch the drain water as it could reach very high temperatures. Always keep children well away from the appliance while in operation.
Care and maintenance Cutting off the water or electricity supply GB Turn off the water tap after every wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before calling for Assistance (see page 24), make sure the problem can't easily be solved by consulting the following list. The water inlet hose is not connected to the tap. The hose is bent. The water tap is not turned on. There is a water shortage. The water pressure is insufficient. The START/RESET button has not been pressed. The washing machine continuously loads and unloads water.
Service 195046379.01 04/2005 - Xerox Business Services Before calling for Assistance: Check whether you can solve the problem on your own (see page 23); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Service Centre on the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised servicemen. Service Notify the operator of: the type of problem; the appliance model (Mod.