Instruction for Use

19
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18).
The temperature can be lowered, or even set to a cold wash (
).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function Effect Comments
Enabled with
programmes:
D e la y T im e r
Delays the start
of the wash by
up to 9 hours.
Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
Th e fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the Start/Reset button, the delay
can only be decreased if you wish to modify it.
All
S t a i n
r e m o v a l
Bleaching cycle
designed to
remove the
toughest stains.
Please remember to pour the bleach into extra compartment 4
(se
e page 20)
.
This function is incompatible with the EASY IRON function.
2, 3, 4, 5,
Rinse cycle.
E a s y i r o n
This option
reduces the
amount of
creasing on
fabrics, m aking
them easier to
iron.
W hen this function is set, programmes 4, 5, 6, 7 will end with the
laundry left to soak (Anti-crease) and the Rinse cycle phase
LED will flash.
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
This function is incompatible with the STAIN REMOVAL function.
3, 4, 5, 6, 7,
8, 9, 10,
Rinse cycle.
S p in
e x c l u s io n
The washing
machine will not
carry out a spin
cycle, but rather
a drum spin at
medium speed
to assist water
draining.
W e recommend that you use it when washing garments which are
difficult to iron.
All
programmes
except for 11
and draining.