Instructions for use WASHING MACHINE Contents GB English,1 GR ÅËËÇÍÉÊÁ, 37 ES Español, ! PT Português, 49 DE Deutsch, 25 NL Nederlands, 61 GB Installation, 2-3 Unpacking and levelling, 2 Electric and water connections, 2-3 The first wash cycle, 3 Technical details, 3 Washing machine description, 4-5 Control panel, 4 Leds, 5 Starting and Programmes, 6 Briefly: how to start a programme, 6 Programme table, 6 Personalisations, 7 Setting the temperature, 7 Setting the spin speed, 7 Functions, 7 WIX
Installation Keep this instruction manual in a safe place for GB future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Read these instructions carefully: they contain vital information on installation, use and safety.
Do not use extensions or multiple sockets. Connecting the drain hose The power supply cable must never be bent or dangerously compressed. The power supply cable must only be replaced by an authorised serviceman. GB Installation 65 - 100 cm Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; Warning! The company denies all liability if and when these norms are not respected.
Washing machine description Control panel GB FUNCTION Buttons Leds ON-OFF/ DOOR ON-OFF LOCK Button Led PROGRAMME Knob Detergent dispenser START/RESET Button TEMPERATURE SPIN SPEED Knob Knob Detergent dispenser: to add detergent and fabric softener (see page 8). TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 7). LEDS: to find out which wash cycle phase is under way.
Leds Delay set: If the Delay Timer function has been enabled (see page. 7), once you have started the programme, the LED corresponding to the delay set will begin to flash: Cycle phase under way: During the wash cycle, the LEDs gradually illuminate on to indicate the cycle phase under way: Prewash Wash Spin cycle Note: during draining, the LED corresponding to the Spin cycle phase will be turned on. Once the set delay is complete, the flashing LED will turn off and the programme set will start.
Starting and Programmes Briefly: starting a programme GB 6. Add the detergent and any fabric softener (see page 8). 7. Start he programme by pressing the START/RESET button. To cancel it, keep the START/RESET button pressed for at least 2 seconds. 8. When the programme is finished, the ON-OFF/ DOOR LOCK Led will flash to indicate that the appliance door can be opened. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly. Turn the washing .
Personalisations Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6). The temperature can be lowered, or even set to a cold wash ( ). GB Installation Setting the spin speed . The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each programme. Programmes Functions To enable a function: 1.
Detergents and laundry Detergent dispenser GB Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. 4 1 2 3 Open up the detergent dispenser and pour in the detergent and fabric softener, as follows.
Precautions and advice This appliance has been designed for nonprofessional, household use and its functions must not be changed. Disposing of an old washing machine: before scrapping your appliance, cut the power supply cable and remove the appliance door. This washing machine should only be used by adults and in accordance with the instructions provided in this manual. Saving energy and respecting the environment Never touch the washing machine when barefoot or with wet or damp hands or feet.
Care and maintenance Cutting off the water or electricity supply GB Turn off the water tap after every wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before calling for Assistance (see page 12), make sure the problem can't easily be solved by consulting the following list. The water inlet hose is not connected to the tap. The hose is bent. The water tap is not turned on. There is a water shortage. The water pressure is insufficient. The START/RESET button has not been pressed. The washing machine continuously loads and unloads water.
Service Before calling for Assistance: Check whether you can solve the problem on your own (see page 11); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Service Centre on the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised servicemen. Service Notify the operator of: the type of problem; the appliance model (Mod.); the serial number (S/N).
Instrucciones para el uso LAVADORA Sumario ES Español ES Instalación, 14-15 Desembalaje y nivelación, 14 Conexiones hidráulicas y eléctricas, 14-15 Primer ciclo de lavado, 15 Datos técnicos, 15 Descripción de la lavadora, 16-17 Panel de control, 16 Luces testigo, 17 Puesta en marcha y Programas, 18 En la práctica: poner en marcha un programa, 18 Tabla de programas, 18 Personalizaciones, 19 WIXL 125 Seleccione la temperatura, 19 Seleccionar el centrifugado, 19 Funciones, 19 Detergentes y ropa, 20 C
Instalación Es importante conservar este manual para poder ES consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. Lea atentamente las instrucciones: ellas contienen importante información sobre la instalación, el uso y la seguridad.
Conexión del tubo de descarga ES No utilice alargadores ni conexiones múltiples. Instalación 65 - 100 cm Conecte el tubo de descarga, sin plegarlo, a un desagüe de pared ubicado a una distancia del piso comprendida entre 65 y 100 cm; Una vez instalada la lavadora, la toma de corriente debe ser fácilmente accesible. El cable no debe estar plegado ni sufrir compresiones. El cable de alimentación debe ser sustituido sólo por técnicos autorizados.
Descripción de la lavadora Panel de control Botones de ES Luces testigo FUNCIÓN Luz indicadora de ENCENDIDO/PUERTA BLOQUEADA Botón de ENCENDIDO/ APAGADO Mando de Cajón de detergentes Botón de PROGRAMAS START/RESET Mando de CENTRIFUGADO TEMPERATURA Cajón de detergentes: para cargar detergentes y aditivos (véase la pág. 20). Mando de TEMPERATURA: para seleccionar la temperatura o el lavado en frío (ver la pág. 19). Luces testigo: para seguir el estado de avance del programa de lavado.
Luces testigo Retraso seleccionado: Si fue activada la función Delay Timer (ver la pág. 19), después de haber puesto en marcha el programa, comenzará a centellear la luz testigo correspondiente al retraso fijado: ES Instalación Las luces testigo suministran información importante. He aquí lo que nos dicen: Fase en curso: Durante el ciclo de lavado, las luces testigo se encenderán progresivamente para indicar su estado de avance.
Puesta en marcha y Programas En la práctica: poner en marcha un programa ES 1. Encienda la lavadora pulsando el botón . Todas las luces testigo se encenderán durante algunos segundos, luego se apagarán y la luz indicadora de ENCENDIDO/PUERTA BLOQUEADA comenzará a centellear. 2. Cargue la ropa y cierre la puerta. 3. Seleccione el programa deseado con el mando de PROGRAMAS. Tabla de programas Tip os d e te jid o s y d e su c ie d a d P rogram as Te m p e r a tu r a D e te r ge n te 4. 5. 6. 7.
Personalizaciones C Seleccione la temperatura Girando el mando de la TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas en la pág. 18). La temperatura se puede disminuir hasta el lavado en frío ( ). Instalación Seleccionar el centrifugado Descripción Girando el mando de CENTRIFUGADO se selecciona la velocidad de centrifugado del programa seleccionado. Las velocidades máximas previstas para los programas son: Programa Velocidad máxima Algodón 1200 r.p.m. Sintéticos 800 r.p.m.
Detergentes y ropa Cajón de detergentes ES El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el ambiente. 4 1 2 3 Extraiga el cajón de detergentes e introduzca el detergente o el aditivo de la siguiente manera: El uso de la cubeta adicional 4 excluye el prelavado.
Precauciones y consejos Seguridad general Este aparato fue fabricado para uso doméstico. No toque la máquina con los pies desnudos ni con las manos o los pies mojados o húmedos. No abra el contenedor de detergentes mientras la máquina está en funcionamiento. En ningún caso fuerce la puerta: podría dañarse el mecanismo de seguridad que la protege de aperturas accidentales. Controle siempre que los niños no se acerquen a la máquina cuando está en funcionamiento.
Mantenimiento y cuidados ES Excluir agua y corriente eléctrica Limpiar la bomba Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar a la Asistencia Técnica (ver la pág. 24), controle que no se trate de un problema de fácil solución ayudándose con la siguiente lista. ES Posibles causas / Solución: La lavadora no se enciende. El enchufe no está introducido en la toma de corriente, o no hace contacto. En la casa no hay corriente. El ciclo de lavado no comienza. La puerta no está bien cerrada. no fue pulsado.
Asistencia Antes de llamar a la Asistencia Técnica: Verifique si la anomalía la puede resolver solo (ver la pág. 23); Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; Si no es así, llame a la Asistencia técnica autorizada, al número de teléfono indicado en el certificado de garantía. ES No recurra nunca a técnicos no autorizados. Asistencia Comunicar: el tipo de anomalía; el modelo de la máquina (Mod.); el número de serie (S/N ).
Bedienungsanleitungen WASCHVOLLAUTOMAT INHALTSVERZEICHNIS DE Deutsch DE Installation, 26-27 Auspacken und Aufstellen, 26 Wasser- und Elektroanschlüsse, 26-27 Erster Waschgang, 27 Technische Daten, 27 Beschreibung des Waschvollautomaten, 28-29 Schalterblende, 28 Kontrollleuchten, 29 Inbetriebnahme und Programme, 30 Kurz zusammengefasst: Waschprogramm starten, 30 Programmtabelle, 30 Individualisierungen, 31 WIXL 125 Einstellen der Temperatur, 31 Einstellen der Schleuder, 31 Funktionen, 31 Waschmitte
Installation Es ist äußerst wichtig, diese Bedienungsanleitung sorgfältig aufzubewahren, um sie jederzeit zu Rate ziehen zu können. Sorgen Sie dafür, dass sie im Falle eines Umzugs oder Übergabe an einen anderen Benutzer das Gerät stets begleitet, damit auch der neue Inhaber die Möglichkeit hat, diese zu Rate zu ziehen. DE Lesen Sie bitte folgende Hinweise aufmerksam durch, sie liefern wichtige Informationen hinsichtlich der Installation, dem Gebrauch und der Sicherheit.
Anschluss des Ablaufschlauches DE Mehrfachstecker. Das Kabel darf nicht gebogen bzw. eingeklemmt werden. Installation 65 - 100 cm Schließen Sie den Ablaufschlauch, ohne ihn dabei zu krümmen, an eine Ablaufleitung, oder an einen in der Wand in einer Mindesthöhe von 65 - 100 cm angelegten Ablauf an; Verwenden Sie bitte keine Verlängerungen oder Das Versorgungskabel darf nur durch autorisierte Fachkräfte ausgetauscht werden. Erster Waschgang Lassen Sie nach der Installation bzw.
Beschreibung des Waschvollautomaten DE Schalterblende Taste FUNKTIONEN Kontrollleuchten Kontrollleuchte ON/FÜLLFENSTER GESPERRT Taste EIN/AUS Wahlschalter Taste Waschmittelschublade PROGRAMME START/RESET Wahlschalter Wahlschalter TEMPERATUR SCHLEUDER Waschmittelschublade: für Waschmittel und Zusätze (siehe Seite 32). Wahlschalter TEMPERATUR: Zur Einstellung der Waschtemperatur oder der Kaltwäsche (siehe Seite 31). Kontrollleuchten: Zur Kontrolle des Waschprogrammablaufs.
Kontrollleuchten Startvorwahl erfolgt: Wurde die Startvorwahl-Funktion Delay Timer (siehe Seite 31) aktiviert, und das Programm in Gang gesetzt, schaltet die Kontrollleuchte, die der eingestellten Zeitverschiebeung entspricht, auf Blinklicht: DE Installation Die Kontrollleuchten liefern wichtige Hinweise. Sie signalisieren: Laufende Programmphase: Während des Waschprogrammablaufs leuchten die Kontrollleuchten nach und nach auf und zeigen so den jeweiligen Stand an.
Inbetriebnahme und Programme Kurz zusammengefasst: Waschprogramm starten DE 1. Schalten Sie den Waschvollautomaten durch Druck ein. Alle Kontrollleuchten leuchten für auf die Taste einige Sekunden auf, und erlöschen kurz darauf wieder. Die Kontrollleuchte ON/FÜLLFENSTER GESPERRT schaltet auf Blinklicht. 2. Wäsche einfüllen und Füllfenster schließen. 3. Stellen Sie das gewünschte Programm mittels des Wahlschalters PROGRAMME ein. 4. Einstellen der Waschtemperatur (siehe Seite 31).
Individualisierungen C Einstellen der Temperatur Durch Drehen des Wahlschalters TEMPERATUR wird die Waschtemperatur eingestellt. (siehe Programmtabelle auf Seite 30). Die Temperatur kann bis auf Kaltwäsche ( ) herabgesetzt werden. DE Installation Einstellen der Schleuder Beschreibung Durch Drehen des Wahlschalters SCHLEUDER wird die Schleudergeschwindigkeit des gewählten Waschprogramms eingestellt.
Waschmittel und Wäsche Waschmittelschublade DE Ein gutes Waschergebnis hängt auch von einer korrekten Waschmitteldosierung ab: Eine zu hohe Dosierung bedeutet nicht unbedingt reinere Wäsche, sie trägt nur dazu bei, die Maschineninnenteile zu verkrusten und die Umwelt zu belasten.
Vorsichtsmaßregeln und Hinweise Allgemeine Sicherheit Dieses Gerät wurde für den nicht professionellen Einsatz im privaten Haushalt konzipiert und seine Funktionen dürfen nicht verändert werden. Ziehen Sie den Gerätestecker nicht am Kabel aus der Steckdose, sondern nur am Stecker selbst. Öffnen Sie die Waschmittelschublade nicht, wenn das Gerät in Betrieb ist. Öffnen Sie das Füllfenster nicht mit Gewalt: Der Sicherheits-Schließmechanismus könnte hierdurch beschädigt werden.
Reinigung und Pflege Wasser- und Stromversorgung abstellen DE Wasserhahn nach jedem Waschvorgang zudrehen. Hierdurch wird der Verschleiß der Wasseranlage verringert und Wasserlecks vorgebeugt. Ziehen Sie den Stecker aus der Steckdose, bevor Sie Ihren Waschvollautomaten reinigen. Reinigung der Pumpe Ihr Gerät ist mit einer selbstreinigenden Pumpe ausgerüstet, eine Wartung ist demnach nicht erforderlich.
Störungen und Abhilfe Es kann immer einmal vorkommen, dass Ihr Waschvollautomat nicht funktioniert. Bevor Sie sich an den Technischen Kundendienst wenden (siehe Seite 36), vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. Mögliche Ursachen / Lösungen: Der Waschvollautomat schaltet sich nicht ein.
Kundendienst Bevor Sie sich an den Kundendienst wenden: Kontrollieren Sie zuerst, ob das Problem nicht allein gelöst werden kann (siehe Seite 35); Starten Sie das Programm erneut, um sicherzustellen, dass die Störung auch wirklich behoben wurde; Ist dies nicht der Fall, dann kontaktieren Sie den autorisierten Kundendienst unter der auf dem Garantieschein aufgedruckten Telefonnummer. DE Wenden Sie sich auf keinen Fall an nicht autorisierte Techniker.
Ïäçãßåò ÷ñÞóçò ÐËÕÍÔÇÑÉÏ ÑÏÕ×ÙÍ Ðåñéå÷üìåíá GR ÅËËÇÍÉÊÁ GR ÅãêáôÜóôáóç, 38-39 Áðïóõóêåõáóßá êáé ïñéæïíôßùóç, 38 ÕäñáõëéêÝò êáé çëåêôñéêÝò óõíäÝóåéò, 38-39 Ðñþôïò êýêëïò ðëõóßìáôïò, 39 Ôå÷íéêÜ óôïé÷åßá, 39 ÐåñéãñáöÞ ôïõ ðëõíôçñßïõ, 40-41 Ôáìðëü åëÝã÷ïõ, 40 ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò, 41 Åêêßíçóç êáé ÐñïãñÜììáôá, 42 Åí óõíôïìßá: åêêßíçóç åíüò ðñïãñÜììáôïò, 42 Ðßíáêáò ôùí ðñïãñáììÜôùí, 42 ÐñïóùðéêÝò Ñõèìßóåéò, 43 WIXL 125 ÅðéëÝîôå ôç èåñìïêñáóßá, 43 ÅðéëÝîôå ôçí ôá÷ýôçôá óôõøßìáôïò, 43 Ëåéôïõñãßå
ÅãêáôÜóôáóç Åßíáé óçìáíôéêü íá öõëÜîåôå ôï åã÷åéñßäéï áõôü ãéá íá ìðïñåßôå íá ôï óõìâïõëåýåóôå ïðïéáäÞðïôå óôéãìÞ. Óå ðåñßðôùóç ðþëçóçò, ðáñá÷þñçóçò Þ ìåôáêüìéóçò, âåâáéùèåßôå üôé ðáñáìÝíåé ìáæß ìå ôï ðëõíôÞñéï ãéá íá ðëçñïöïñåß ôïí íÝï éäéïêôÞôç ãéá ôç ëåéôïõñãßá êáé ôéò ó÷åôéêÝò ðñïåéäïðïéÞóåéò. GR ÄéáâÜóôå ðñïóåêôéêÜ ôéò ïäçãßåò: õðÜñ÷ïõí óçìáíôéêÝò ðëçñïöïñßåò ãéá ôçí åãêáôÜóôáóç, ôç ÷ñÞóç êáé ôçí áóöÜëåéá. Áðïóõóêåõáóßá êáé ïñéæïíôßùóç Áðïóõóêåõáóßá 1. ÁðïóõóêåõÜóôå ôï ðëõíôÞñéï. 2.
Óýíäåóç ôïõ óùëÞíá áäåéÜóìáôïò íåñïý ÓõíäÝóôå ôïí óùëÞíá áäåéÜóìáôïò íåñïý ÷ùñßò íá ôïí ôóáêßóåôå óå ìéá áðï÷Ýôåõóç Þ óå ìéá åðéôïß÷éá áðï÷Ýôåõóç óå ýøïò áðü ôï Ýäáöïò ìåôáîý 65 êáé 100 cm. Ìçí ôóáêßæåôå êáé ìçí ôïðïèåôåßôå âáñéÜ áíôéêåßìåíá ðÜíù óôï êáëþäéï ôñïöïäïóßáò. Ìðïñåßôå åðßóçò íá óôçñßîåôå ôïí óùëÞíá áäåéÜóìáôïò íåñïý óôï ÷åßëïò åíüò íéðôÞñá äÝíïíôÜò ôïí óôçí âñýóç (âëÝðå åéêüíá). Ôï åëåýèåñï Üêñï ôïõ óùëÞíá äåí èá ðñÝðåé íá âõèßæåôáé óôï íåñü.
ÐåñéãñáöÞ ôïõ ðëõíôçñßïõ Ôáìðëü åëÝã÷ïõ GR ÐëÞêôñá ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò ËÅÉÔÏÕÑÃÉÁÓ ÅíäåéêôéêÞ ëõ÷íßá ÅÍÅÑÃÏÐÏÉÇÓÇ/ÐÏÑÔÁ ÁÓÖÁËÉÓÌÅÍÇ ÐëÞêôñï ÁÍÁÌÌÁÔÏÓ/ ÓÂÇÓÉÌÁÔÏÓ ÐëÞêôñï ðéëïãÞò ÐÑÏÃÑÁÌÌÁÔÙÍ ÈÞêç áðïññõðáíôéêþí ÐëÞêôñï START/RESET ÐëÞêôñï ðéëïãÞò ÐëÞêôñï ðéëïãÞò ÈÅÑÌÏÊÑÁÓÉÁÓ ÓÔÕØÉÌÁÔÏÓ ÈÞêç áðïññõðáíôéêþí: ãéá ôçí ðñïóèÞêç áðïññõðáíôéêþí êáé ðñüóèåôùí (âëÝðå óåë. 44). ÅíäåéêôéêÝò ëõ÷íßåò: ãéá íá ðáñáêïëïõèåßôå ôçí ðñüïäï ôïõ ðñïãñÜììáôïò ðëýóçò.
ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò Ðñïãñáììáôéóìüò ðëýóçò: Áí Ý÷åé åíåñãïðïéçèåß ç ëåéôïõñãßá Delay Timer (âëÝðå óåë. 43), áöïý îåêéíÞóåé ôïõ ðñüãñáììá, èá áñ÷ßóåé íá áíáâïóâÞíåé ôï åíäåéêôéêü öùôÜêé ôï ó÷åôéêü ìå ôçí ôåèåßóá êáèõóôÝñçóç: Ðñüðëõóç Ðëýóéìï ÎÝâãáëìá ÐåñéãñáöÞ Óôýøéìï Óçìåßùóç: êáôÜ ôç öÜóç áäåéÜóìáôïò èá áíÜøåé ç åíäåéêôéêÞ ëõ÷íßá ðïõ ó÷åôßæåôáé ìå ôç öÜóç Óôõøßìáôïò.
Åêêßíçóç êáé ÐñïãñÜììáôá Åí óõíôïìßá: åêêßíçóç åíüò ðñïãñÜììáôïò GR 6. ÔïðïèåôÞóôå ôï áðïññõðáíôéêü êáé ôõ÷üí ðñüóèåôá (âëÝðå óåë. 44). 7. ÅêêéíÞóôå ôï ðñüãñáììá ðéÝæïíôáò ôï êïõìðß START/ RESET. Ãéá ôçí áêýñùóç êñáôÞóôå ðáôçìÝíï ôï êïõìðß START/RESET ãéá ôïõëÜ÷éóôïí 2 äåõôåñüëåðôá. 8. Óôï ôÝëïò ôïõ ðñïãñÜììáôïò ç åíäåéêôéêÞ ëõ÷íßá ÅÍÅÑÃÏÐÏÉÇÓÇ/ÐÏÑÔÁ ÁÓÖÁËÉÓÌÅÍÇ áíáâïóâÞíåé õðïäåéêíýïíôáò üôé ç ðüñôá ìðïñåß íá áíïßîåé. ÂãÜëôå ôá ñïý÷á êáé áöÞóôå ôçí ðüñôá ìéóüêëåéóôç ãéá íá óôåãíþóåé ï êÜäïò.
ÐñïóùðéêÝò Ñõèìßóåéò C ÅðéëÝîôå ôç èåñìïêñáóßá ÅðéëÝîôå ôçí ôá÷ýôçôá óôõøßìáôïò ÐåñéãñáöÞ ÓôñÝöïíôáò ôï ðëÞêôñï åðéëïãÞò ÓÔÕØÉÌÏ ìðïñåßôå íá åðéëÝîåôå ôçí ôá÷ýôçôá óôõøßìáôïò ôïõ åðéëåãìÝíïõ ðñïãñÜììáôïò. Ïé ìÝãéóôåò ðñïâëåðüìåíåò ôá÷ýôçôåò ãéá ôá ðñïãñÜììáôá åßíáé: ÐñïãñÜììáôá ÌÝãéóôç ôá÷ýôçôá ÂáìâáêåñÜ 1200 óôñïöÝò áíÜ ëåðôü ÓõíèåôéêÜ 800 óôñïöÝò áíÜ ëåðôü ÌÜëëéíá 600 óôñïöÝò áíÜ ëåðôü ÌåôáîùôÜ ü÷é ÐñïãñÜììáôá .
ÁðïññõðáíôéêÜ êáé ñïý÷á ÈÞêç áðïññõðáíôéêþí GR Ôï êáëü áðïôÝëåóìá ôïõ ðëõóßìáôïò åîáñôÜôáé åðßóçò êáé áðü ôç óùóôÞ äïóïëïãßá ôïõ áðïññõðáíôéêïý: õðåñâÜëëïíôáò äåí ðëÝíïõìå áðïôåëåóìáôéêüôåñá êáé åðéðëÝïí óõíôåëïýìå óôç äçìéïõñãßá êñïýóôáò óôá åóùôåñéêÜ ìÝñç ôïõ ðëõíôçñßïõ êáé óôç ìüëõíóç ôïõ ðåñéâÜëëïíôïò. 4 1 2 3 ÂãÜëôå ôç èÞêç áðïññõðáíôéêþí êáé åéóÜãåôå ôï áðïññõðáíôéêü Þ ôï ðñüóèåôï ùò åîÞò.
ÐñïöõëÜîåéò êáé óõìâïõëÝò Ïé êáôáíáëùôÝò èá ðñÝðåé íá áðåõèýíïíôáé óôéò ôïðéêÝò áñ÷Ýò Þ óôá êáôáóôÞìáôá ëéáíéêÞò ãéá ðëçñïöïñßåò ðïõ áöïñïýí ôç óùóôÞ äéÜèåóç ôùí ðáëáéþí çëåêôñéêþí óõóêåõþí. ÃåíéêÞ áóöÜëåéá ÄéÜèåóç ôïõ ðáëéïý ðëõíôçñßïõ: ðñéí ôï ðåôÜîåôå, êáôáóôÞóôå ôï ìç ÷ñçóéìïðïéÞóéìï êüâïíôáò ôï êáëþäéï çëåêôñéêÞò ôñïöïäïóßáò êáé âãÜæïíôáò ôçí ðüñôá. Ç óõóêåõÞ áõôÞ ó÷åäéÜóôçêå ãéá ïéêéáêÞ ÷ñÞóç, ìç åðáããåëìáôéêÞ êáé ïé ëåéôïõñãßåò ôçò äåí ðñÝðåé íá áëëïéùèïýí.
ÓõíôÞñçóç êáé öñïíôßäá Êëåßóéìï ðáñï÷þí íåñïý êáé çëåêôñéêïý ñåýìáôïò GR Êáèáñéóìüò ôçò áíôëßáò Êëåßíåôå ôçí âñýóç ìåôÜ áðü êÜèå ðëýóéìï. ¸ôóé ðåñéïñßæåôáé ç öèïñÜ ôçò õäñáõëéêÞò åãêáôÜóôáóçò ôïõ ðëõíôçñßïõ êáé áðïóïâåßôáé ï êßíäõíïò áðùëåéþí. Ôï ðëõíôÞñéï äéáèÝôåé ìéá áíôëßá áõôïêáèáñéæüìåíç ðïõ äåí ÷ñåéÜæåôáé óõíôÞñçóç. Ìðïñåß üìùò íá ôý÷åé íá ðÝóïõí ìéêñÜ áíôéêåßìåíá (êÝñìáôá, êïõìðéÜ) óôïí ðñïèÜëáìï ðïõ ðñïóôáôåýåé ôçí áíôëßá, ðïõ âñßóêåôáé óôï êÜôù ìÝñïò áõôÞò.
ÐñïâëÞìáôá êáé ëýóåéò Ìðïñåß íá óõìâåß ôï ðëõíôÞñéï íá ìç ëåéôïõñãåß. Ðñéí ôçëåöùíÞóåôå óôçí ÕðïóôÞñéîç (âëÝðå óåë. 60), åëÝãîôå áí äåí ðñüêåéôáé ãéá Ýíá ðñüâëçìá ðïõ åðéëýåôáé åýêïëá ìå ôç âïÞèåéá ôïõ áêüëïõèïõ êáôáëüãïõ. Ï óùëÞíáò ôñïöïäïóßáò ôïõ íåñïý äåí åßíáé óõíäåäåìÝíïò óôïí êñïõíü. Ï óùëÞíáò åßíáé äéðëùìÝíïò. ç âñýóç äåí åßíáé áíïéêôÞ. Óôï óðßôé ëåßðåé ôï íåñü. Äåí õðÜñ÷åé áñêåôÞ ðßåóç. Ôï êïõìðß START/RESET äåí ðáôÞèçêå. Ôï ðëõíôÞñéï öïñôþíåé êáé áäåéÜæåé íåñü óõíå÷þò.
Ôå÷íéêÞ ÕðïóôÞñéîç Ðñéí êáëÝóåôå ôçí ôå÷íéêÞ õðïóôÞñéîç: Âåâáéùèåßôå üôé äåí ìðïñåßôå íá åðéëýóåôå ìüíïé óáò ôï ðñüâëçìá (âëÝðå óåë. 59) ÅðáíåêêéíÞóôå ôï ðñüãñáììá ãéá íá åëÝãîåôå áí ôï ðñüâëçìá áíôéìåôùðßóôçêå Óå áíôßèåôç ðåñßðôùóç, åðéêïéíùíÞóôå ìå ôï åîïõóéïäïôçìÝíï ôìÞìá ôå÷íéêÞò õðïóôÞñéîçò ðïõ áíáãñÜöåôáé óôï ðéóôïðïéçôéêü åããýçóçò. GR Ìçí êáôáöåýãåôå ðïôÝ óå ìç åîïõóéïäïôçìÝíïõò ôå÷íéêïýò. ÕðïóôÞñéîç ÃíùóôïðïéÞóôå: ôï åßäïò ôïõ ðñïâëÞìáôïò ôï ìïíôÝëï ôïõ ìç÷áíÞìáôïò (Mod.
Instruções para utilização MÁQUINA DE LAVAR ROUPA PT PT Português Sumário Instalação, 50-51 Desembalar e nivelar, 50 Ligações hidráulicas e eléctricas, 50-51 Primeiro ciclo de lavagem, 51 Dados técnicos, 51 Descrição da máquina de lavar roupa, 52-53 Painel de comandos, 52 Indicadores luminosos, 53 Início e Programas, 54 Como iniciar um programa, 54 Tabela dos programas, 54 WIXL 125 Personalizações, 55 Seleccione a temperatura, 55 Seleccione a centrifugação, 55 Funções, 55 Detergentes e roupa, 56 G
Instalação PT É importante guardar este manual para poder consultá-lo a qualquer momento. Se a máquina for vendida, cedida ou transferida, certifique-se que este manual permaneça com a máquina para informar o novo proprietário acerca do seu funcionamento e das respectivas advertências. Um cuidadoso nivelamento dá estabilidade à máquina e evita vibrações, ruídos e deslocamentos durante o funcionamento.
Ligação do tubo de descarga PT O cabo não deve ser dobrado nem apertado. Instalação 65 - 100 cm Ligue o tubo de descarga, sem dobrá-lo, a uma conduta de descarga ou a uma descarga na parede situada entre 65 e 100 cm. de altura do chão; Não empregue extensões nem fichas múltiplas. O cabo de alimentação deve ser substituído somente por técnicos autorizados. Atenção! O fabricante declina toda a responsabilidade se estas regras não forem respeitadas.
Descrição da máquina de lavar roupa Painel de comandos PT Teclas das Indicadores luminosos FUNÇÕES Indicador luminoso ON-OFF/PORTA TRANCADA Tecla de LIGA/DESLIGA Selector de PROGRAMAS Gaveta dos detergentes Tecla de START/RESET Selector de Selector de TEMPERATURA CENTRIFUGAÇÃO Gaveta dos detergentes: para carregar detergentes e aditivos (veja a pág. 56). Selector da TEMPERATURA: para definir a temperatura ou a lavagem a frio (veja a pág. 55).
Indicadores luminosos Pré-lavagem Lavagem Enxaguamento Centrifugação Observação: durante a fase de descarga acenderse-á o indicador luminoso correspondente à fase de Centrifugação. Detergentes Precauções Depois de ter passado o tempo de atraso seleccionado, o indicador luminoso intermitente irá desligarse e começará o programa estabelecido.
Início e Programas Como iniciar um programa PT 1. Para ligar a máquina de lavar roupa, carregue na . Todos os indicadores luminosos acendertecla se-ão alguns segundos e, em seguida, se apagarão e o indicador luminoso ON-OFF/PORTA TRANCADA ficará intermitente. 2. Coloque dentro a roupa e feche. 3. Seleccione através do selector de PROGRAMAS o programa que desejar. 4. Seleccione a temperatura de lavagem (veja a pág. 55).
Personalizações C Seleccione a temperatura Gire o selector da TEMPERATURA para seleccionar a temperatura de lavagem (veja a Tabela dos programas na pág. 54). A temperatura pode ser diminuída até à lavagem a frio ( ). Instalação Seleccione a centrifugação Descrição Gire o selector da CENTRIFUGAÇÃO para seleccionar a velocidade de centrifugação do programa seleccionado.
Detergentes e roupa PT Gaveta dos detergentes Preparar a roupa O bom resultado da lavagem depende também do uso da dose certa de detergente: com excessos não se lava melhor, e contribui-se quer para a formação de incrostações nas peças internas da máquina de lavar, quer para a poluição do meio ambiente. Separe a roupa em função: - do tipo de tecido / do símbolo na etiqueta. - as cores: separe as peças coloridas das brancas. Esvazie as algibeiras e verifique se há botões soltos.
Precauções e conselhos Esta máquina de lavar roupa foi projectada e Segurança geral Este aparelho foi projectado para um uso doméstico. Não toque na máquina com os pés descalços nem com as mãos ou os pés molhados ou húmidos. Não abra a gaveta dos detergentes enquanto a máquina estiver a funcionar. Em nenhum caso force a porta para abri-la: poderá danificar o mecanismo de segurança que a protege contra aberturas acidentais.
Manutenção e cuidados Interromper a alimentação de água e de corrente eléctrica PT Feche a torneira da água depois de cada lavagem. Desta maneira diminuiu-se o desgaste do sistema hidráulico da máquina de lavar roupa e elimina-se o risco de inundação. Limpar a bomba Esta máquina de lavar roupa é equipada com uma bomba com limpeza automática que não precisa de operações de manutenção.
Anomalias e soluções Pode acontecer que a máquina de lavar roupa não funcione. Antes de telefonar para a Assistência Técnica (veja a pág. 60), verifique que não se trata de um problema fácil de resolver com ajuda da seguinte lista: PT Possíveis causas / Solução: A máquina de lavar roupa não liga. A ficha não está colocada na tomada eléctrica, ou não o suficiente para haver contacto. Em casa não há corrente. O ciclo de lavagem não inicia. A porta da máquina não está bem fechada.
Assistência 195041573.01 05/2004 - Xerox Business Services Antes de contactar a Assistência Técnica: Verifique se consegue resolver a anomalia (veja a pág. 59); Reinicie o programa para verificar se o inconveniente foi resolvido; Em caso negativo, contacte a assistência técnica autorizada no número de telefone indicado no certificado de garantia. PT Nunca recorra a técnicos não autorizados. Assistência Comunique: o tipo de anomalia; o modelo da máquina (Mod.); o número de série (S/N).
Instructies voor het gebruik WASMACHINE Inhoud NL Nederlands NL Installatie, 62-63 Uitpakken en waterpas zetten, 62 Water- en elektrische aansluiting, 62-63 Eerste wasprogramma, 63 Technische gegevens, 63 Beschrijving van de wasmachine, 64-65 Bedieningspaneel, 64 Controlelampjes, 65 Start en programma's, 66 In het kort: een programma starten, 66 Tabel van de programma's, 66 Persoonlijk instellen, 67 WIXL 125 Instellen van de temperatuur, 67 Instellen van de centrifuge, 67 Functies, 67 Wasmiddel en
Installatie Het is belangrijk dit boekje te bewaren zodat u het kunt raadplegen wanneer u maar wilt. In het geval dat u de machine verkoopt, of u verhuist, moet het boekje bij de machine blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan leren kennen. NL Een correcte waterpas geeft de machine stabiliteit en vermijdt trillingen, lawaai en het zich verplaatsen gedurende het functioneren van de machine.
Aansluiting van de afvoerbuis NL Het snoer mag niet in bochten of geknikt liggen. Installatie 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen 65 en 100 cm van de grond af; Gebruik geen verlengsnoeren of dubbelstekkers. De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant is niet aansprakelijk wanneer deze normen niet gerespecteerd zijn.
Beschrijving van de wasmachine Bedieningspaneel NL FUNCTIE knoppen Controlelampje AAN/DEUR GEBLOKKEERD Controlelampjes AAN/UIT knop PROGRAMMA knop Wasmiddellaatje START/RESET knop CENTRIFUGE knop knop Wasmiddellaatje: voor wasmiddel en verdere toevoegingen (zie blz. 68). TEMPERATUUR knop: voor het instellen van de temperatuur of koud wassen (zie blz. 67). Controlelampjes: voor het volgen van het verloop van het wasprogramma.
Controlelampjes Uitgestelde start ingesteld: Als de functie Delay Timer is geactiveerd (zie blz. 67), nadat het programma is gestart, gaat het controlelampje dat bij de uitgestelde start hoort knipperen: Fase die bezig is: Gedurende het verloop van het wasprogramma : gaan de controlelampjes een voor een aan om aan te tonen met welk programmaonderdeel de machin bezig is: Voorwas Beschrijving Was Spoelen Centrifugeren Funtie-knoppen De FUNCTIE-KNOPPEN dienen ook als controlelampjes.
Start en Programma's In het kort: een programma starten NL 6. Giet het wasmiddel en verdere toevoegingen in het laatje (zie blz. 68). 7. Start het programma met de START/RESET knop. Voor het annuleren houdt u de START/RESET knop minstens 2 seconden ingedrukt. 8. Aan het einde van het programma gaat het controlelampje AAN/DEUR GEBLOKKEERD knipperen hetgeen betekent dat de deur geopend kan worden. Haal het wasgoed eruit en laat de deur op een kier staan zodat de trommel kan drogen.
Persoonlijk instellen Instellen van de temperatuur Door aan de TEMPERATUUR-knop te draaien stelt u de temperatuur van het wassen in (zie Tabel van de programma's op blz. 66). De temperatuur kan verlaagd worden tot aan koud ( ). NL Installatie Instellen van de centrifuge Door aan de CENTRIFUGE-knop te draaien stelt u de snelheid van de centrifuge van het gekozen programma in.
Wasmiddel en wasgoed Wasmiddellaatje NL Een goed resultaat van de was hangt ook af van een juiste dosis wasmiddel: te veel maakt het wassen niet beter en blijft in het wasgoed hangen terwijl het slecht is voor het milieu. 4 1 2 3 Trek het laatje naar voren en giet het wasmiddel en/of de verdere toevoegingen erin als volgt. bakje 1: voorwasmiddel (poeder) Voordat u het middel erin giet moet u controleren of het bakje 4 is geplaatst.
Voorzorgsmaatregelen en raadgevingen Algemene veiligheid Dit apparaat is gemaakt voor huishoudelijk gebruik, niet-professioneel, en zijn functies mogen niet veranderd worden. Raak de machine niet aan als u blootsvoets bent of met natte of vochtige handen of voeten. Open het wasmiddellaatje niet terwijl de machine in werking is. Raak het afvoerwater niet aan aangezien het nogal warm kan zijn. Probeer in geval van storingen nooit zelf interne mechanismen van de machine te repareren.
Onderhoud Afsluiten van water en stroom NL Doe de kraan dicht na iedere wasbeurt. Hiermee reduceert u de kans op lekkage. Sluit altijd eerst de stroom af voordat u de wasmachine gaat schoonmaken en gedurende onderhoudswerkzaamheden. Toegang tot het paneel: 1. verwijder het paneeltje aan de voorkant van de wasmachine met behulp van een schroevendraaier (zie afbeelding); Schoonmaken van de wasmachine De buitenkant en de rubber onderdelen kunnen met een spons en lauw sopje worden schoongemaakt.
Storingen en oplossingen Het kan gebeuren dat de machine niet werkt. Voordat u de installateur opbelt (zie blz. 72), controleert u of het een storing betreft die gemakkelijk te verhelpen is met behulp van de volgende lijst. NL Mogelijke oorzaken / Oplossing: De wasmachine gaat niet aan. De stekker is niet in het stopcontact of niet ver genoeg ingestoken om contact te maken. Er is geen stroom. Het wasprogramma start niet. De deur is niet goed dicht. De knop is niet ingedrukt.
Service 195041573.02 03/2005 - Xerox Business Services Voordat u er de installateur bijhaalt: Kijk eerst even of u het probleem zelf kunt oplossen (zie blz. 71); Start het programma om te controleren of de storing is verholpen; Is dit niet het geval dan neemt u contact op met de bevoegde dichtsbijzijnde Technische Dienst via het telefoonnummer dat op het garantiebewijs/gebruiksaanwijzing staat. NL Nooit een niet-bevoegde installateur erbij halen.