Instructions for use WASHING MACHINE Contents GB English,1 CZ Česky,15 SK Slovensky,29 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 4 Cutting off the water and electricity supplies Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5 XWSNE 61253 General safety Disp
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Unpacking and levelling Unpacking 1.
Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; alternatively, rest it on the side of a washbasin or bathtub, fastening the duct supplied to the tap (see figure). The free end of the hose should not be underwater. ! Do not use extension cords or multiple sockets. ! The cable should not be bent or compressed.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine • The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only.
Description of the washing machine GB Control panel START/PAUSE button and indicator light ON/OFF button TEMPERATURE button DISPLAY WASH CYCLE Detergent dispenser drawer SELECTOR KNOB PUSH & WASH SPIN button DELAYED START button OPTION buttons button Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). DELAYED START button: press to set a delayed start for the selected wash cycle; the delay period appears on the display.
Display GB B A C C The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the DELAYED START option has been set, the countdown to the start of the selected wash cycle will appear.
Running a wash cycle GB Rapid programming 1. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page. 2. ADD THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”. 3. CLOSE THE DOOR. 4. Press the “PUSH & WASH” button to start the wash programme. Traditional programming 1.
Wash cycles and options Drain only * * If you select programme Cycle duration 600 800 1000 1000 0 800 1000 - - 2,5 3 2,5 2,5 0,5 1 1 - - 1200 - 6 53 2,09 75 210’ 1200 - - 6 53 0,78 50 200’ 1200 800 800 1200 - - 6 3 3 6 53 46 46 53 0,65 0,99 0,70 0,85 65 36 36 61 1200 800 800 800 1000 - - 6 6 1 3 6 80 - 0,20 - - 230’ - 145’ 9’ 30 30’ 60’ 90° 60° Cotton Standard 60° (1): heavily soiled whites
GB Push & Wash This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the Push & Wash function will be deactivated). To start the Push & Wash cycle press and hold the relative button for 2 seconds. The lit indicator light indicates that the cycle has started.
Detergents and laundry Detergent dispenser drawer Special wash cycles Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. ! Do not use hand washing detergents because these create too much foam. ! Use powder detergent for white cotton garments, for prewashing, and for washing at temperatures over 60°C.
GB Cotton Standard 20°C (programme 12) ideal for lightly soiled cotton loads. The effective performance levels achieved at cold temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying speed, with repeated and frequent peaks. Eco Synthetic (programme 13) ideal for mixed loads (cotton and synthetics) with a normal soil level.
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power in the house. The wash cycle does not start.
Service GB Before contacting the Technical Assistance Service: • Check whether you can solve the problem alone (see “Troubleshooting”). • Restart the wash cycle to check whether the problem has been solved. • If this is not the case, contact an authorised Technical Assistance Centre. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Návod k použití PRAČKA Obsah CZ Česky CZ Instalace, 16-17 Rozbalení a vyrovnání do vodorovné polohy Připojení k elektrické a k vodovodní síti První prací cyklus Technické údaje Údržba a péče, 18 Uzavření přívodu vody a vypnutí elektrického napájení Čištění pračky Čištění dávkovače pracích prostředků Péče o dvířka a buben Čištění čerpadla Kontrola přítokové hadice na vodu Opatření a rady, 19 XWSNE 61253 Základní bezpečnostní pokyny Likvidace Manuální otevření dvířek Popis pračky, 20-21 Ovládací pane
Instalace CZ ! Je důležité uschovat tento návod tak, abyste jej mohli kdykoli konzultovat. V případě prodeje, darování nebo přestěhování pračky se ujistěte, že zůstane uložen v blízkosti pračky, aby mohl posloužit novému majiteli při seznámení s její činností a s příslušnými upozorněními. ! Pozorně si přečtěte uvedené pokyny: Obsahují důležité informace týkající se instalace, použití a bezpečnosti při práci. Rozbalení a vyrovnání do vodorovné polohy Rozbalení 1. Rozbalte pračku. 2.
Připojení vypouštěcí hadice 65 - 100 cm Připojte vypouštěcí hadici k odpadovému potrubí nebo k odpadu ve stěně, který se nachází od 65 do 100 cm nad zemí; zamezte jejímu ohybu nebo ji uchyťte k okraji umývadla či vany a připevněte ji ke kohoutu prostřednictvím držáku z příslušenství (viz obrázek). Volný konec vypouštěcí hadice nesmí zůstat ponořený do vody.
Údržba a péče CZ Uzavření přívodu vody a vypnutí elektrického napájení • Po každém praní uzavřete přívod vody. Tímto způsobem dochází k omezení opotřebení pračky a ke snížení nebezpečí úniku vody. • Před zahájením čištění pračky a během operací údržby vytáhněte zástrčku napájecího kabelu z elektrické zásuvky. Čištění pračky • Vnější části a části z gumy se mohou čistit hadrem navlhčeným ve vlažné vodě a saponátu. Nepoužívejte rozpouštědla ani abrazivní látky.
Opatření a rady ! Pračka byla navržena a vyrobena v souladu s platnými mezinárodními bezpečnostním předpisy. Tato upozornění jsou uváděna z bezpečnostních důvodů a je třeba si je pozorně přečíst. Základní bezpečnostní pokyny • Toto zařízení bylo navrženo výhradně pro použití v domácnosti.
Popis pračky CZ Ovládací panel Tlačítko a kontrolka START/PAUSE Tlačítko ON/OFF Tlačítko TEPLOTA DISPLEJ Dávkovač pracích prostředků Tlačítko OTOČNÝ OVLADAČ PROGRAMŮ PUSH & WASH Dávkovač pracích prostředků: slouží k dávkování pracích prostředků a přídavných prostředků (viz “Prací prostředky a prádlo”). Tlačítko ON/OFF : Zapněte nebo vypněte pračku krátkým stisknutím tlačítka. Kontrolka START/PAUSE pomalu blikající zeleným světlem poukazuje na to, že je zařízené zapnuté.
Displej CZ B A C C Displej slouží k naprogramování zařízení a poskytuje četné informace. V části A je zobrazována doba trvání různých programů, které jsou k dispozici, a po zahájení cyklu i zbývající doby do jeho ukončení; v případě nastavení ODLOŽENÝ START bude zobrazena doba chybějící do zahájení zvoleného programu. Kromě toho budou při stisknutí příslušného tlačítka zobrazeny maximální hodnoty rychlosti odstřeďování a teploty, kterých zařízení může dosáhnout v závislosti na nastaveném programu.
Jak provést prací cyklus CZ Rychlé nastavení programu 1. NAPLŇTE PRAČKU PRÁDLEM. Otevřete dvířka s průzorem. Naplňte pračku prádlem a dbejte přitom, aby nedošlo k překročení množství náplně, uvedeného v tabulce programů na následující straně. 2. NADÁVKUJTE PRACÍ PROSTŘEDEK. Vytáhněte dávkovač pracích prostředků a naplňte prací prostředek do příslušných přihrádek způsobem vysvětleným v části “Prací prostředky a prádlo”. 3. ZAVŘETE DVÍŘKA. 4. Zahajte prací program stisknutím tlačítka „Push & Wash“.
Programy a volitelné funkce Celkové množství vody (lt) Doba trvání cyklu 13 14 14 14 Spotřeba energie (kWh) 12 Zbytková vlhkost (%) 10 10 11 Max. náplň (kg) 9 Bělicí prostředek 8 Programy Speciální Sport 30° Tmavé prádlo 30° Zabránění zápachu (Bavlna) 60° Zabránění zápachu (Syntetické) 40° Jemné Prádlo 30° Vlna: Pro vlnu, kašmír apod. 40° Přikrývky: pro prádlo plněné husím peřím. 30° Standard Bavlna s předpírkou: Mimořádně znečištěné bílé prádlo.
CZ Push & Wash Tato funkce umožňuje zahájit prací cyklus i při vypnutém zařízení, aniž by bylo třeba nejdříve stisknout tlačítko ON/OFF nebo následně, při zapnutí zařízení, bez použití jakéhokoli dalšího tlačítka a/nebo otočného ovladače (v opačném případě bude program Push & Wash zrušen). Za účelem zahájení cyklu Push & Wash držte stisknuté tlačítko po dobu 2 sekund. Rozsvícená kontrolka poukazuje na to, že cyklus byl zahájen.
Prací prostředky a prádlo Dávkovač pracích prostředků Dobrý výsledek praní závisí také na správném dávkování pracího prostředku: použití jeho nadměrného množství snižuje efektivitu praní a napomáhá tvorbě vodního kamene na vnitřních částech pračky a zvyšuje znečištění životního prostředí. ! Nepoužívejte prací prostředky určené pro ruční praní, protože způsobují tvorbu nadměrného množství pěny. ! Pro předpírku a praní při teplotě vyšší než 60 °C používejte práškové prací prostředky pro bílé bavlněné prádlo.
CZ Standardní programy pro bavlnu 20°C (program 12) ideální pro náplně ze znečištěné bavlny. Dobrá výkonnost i za studena, srovnatelná s praním při 40 °C, je zaručena mechanickým působením, které je založeno na změně rychlosti v krátkých nebo dlouhých intervalech. Eco Syntetické (program 13)ideální pro smíšené náplně (bavlna a syntetika), tvořené středně znečištěným prádlem.
Poruchy a způsob jejich odstranění Může se stát, že pračka nebude fungovat. Dříve, než zatelefonujete na Servisní službu (viz “Servisní služba”), zkontrolujte, zda se nejedná o problém, který lze snadno vyřešit s pomocí následujícího seznamu. Poruchy: Možné příčiny / Způsob jejich odstranění: Pračku nelze zapnout. • Zástrčka není zasunuta v zásuvce nebo není zasunuta natolik, aby došlo ke spojení kontaktů. • V celém domě je vypnutý proud. Nedochází k zahájení pracího cyklu.
Servisní služba CZ Před přivoláním Servisní služby: • Zkontrolujte, zda nejste schopni poruchu odstranit sami (viz “Poruchy a způsob jejich odstranění”); • Znovu uveďte do chodu prací program, abyste ověřili, zda byla porucha odstraněna; • V záporném případě se obraťte na středisko servisní služby. ! Nikdy se neobracejte s žádostí o pomoc na techniky, kteří nejsou k výkonu této činnosti oprávněni. Při hlášení poruchy uveďte: • druh poruchy; • model zařízení (Mod.); • výrobní číslo (S/N).
Návod na použitie PRÁČKA Obsah SK Slovensky SK Inštalácia, 30-31 Rozbalenie a vyrovnanie do vodorovnej polohy Pripojenie k elektrickej a k vodovodnej sieti Prvý prací cyklus Technické údaje Údržba a starostlivosť, 32 Uzavretie prívodu vody a vypnutie elektrického napájania Čistenie práčky Čistenie dávkovača pracích prostriedkov Starostlivosť o dvierka a bubon Čistenie čerpadla Kontrola prítokovej hadice na vodu Opatrenia a rady, 33 XWSNE 61253 Základné bezpečnostné pokyny Likvidácia Manuálne otvoren
Inštalácia SK ! Je veľmi dôležité uschovať tento návod kvôli prípadnému ďalšiemu použitiu. V prípade predaja, darovania alebo presťahovania práčky sa uistite, že zostane uložený v jej blízkosti, aby mohol poslúžiť novému majiteľovi pri oboznámení sa s činnosťou a s príslušnými upozorneniami. ! Pozorne si prečítajte uvedené pokyny: obsahujú dôležité informácie, týkajúce sa inštalácie, použitia a bezpečnosti pri práci.
Pripojenie vypúšťacej hadice 65 - 100 cm Pripojte vypúšťaciu hadicu k odpadovému potrubiu alebo k odpadu v stene, nachádzajúcom sa od 65 do 100 cm nad zemou; jednoznačne zamedzte jej ohybu. alebo ju uchyťte k okraju umývadla či vane, a pripevnite vodiaci držiak z príslušenstva ku kohútu (viď obrázok). Voľný koniec vypúšťacej hadice nesmie zostať ponorený do vody.
Údržba a starostlivosť SK Uzavretie prívodu vody a vypnutie elektrického napájania • Po každom praní uzatvorte prívod vody. Týmto spôsobom sa znižuje opotrebenie rozvodu vody zariadenia a znižuje sa nebezpečenstvo úniku vody. • Pred zahájením čistenia práčky a počas údržby je potrebné vytiahnuť zástrčku prívodného kábla zo zásuvky. Čistenie práčky • Vonkajšie časti a časti z gumy môžu byť čistené utierkou navlhčenou vo vlažnej vode a saponáte. Nepoužívajte rozpúšťadlá alebo abrazívne prostriedky.
Opatrenia a rady ! Práčka bola navrhnutá a vyrobená v súlade s platnými medzinárodnými bezpečnostnými predpismi. Tieto upozornenia sú uvádzané z bezpečnostných dôvodov a je potrebné si ich pozorne prečítať. Základné bezpečnostné pokyny • Toto zariadenie bolo navrhnuté výhradne na použitie ako spotrebič.
Popis práčky SK Ovládací panel Tlačidlo a kontrolka START/PAUSE Tlačidlo ON/OFF Tlačidlo TEPLOTA DISPLEJ Dávkovač pracích prostriedkov OTOČNÝ OVLÁDAČ PROGRAMOV Tlačidlo PUSH & WASH Tlačidlo ONESKORENÝ Tlačidlá VOLITEĽNÝCH ŠTART FUNKCIÍ ODSTREĎOVANIE Tlačidlo Dávkovač pracích prostriedkov: slúži na dávkovanie pracích prostriedkov a prídavných prostriedkov (viď “Pracie prostriedky a prádlo”).
Displej B SK A C C Displej slúži na programovanie zariadenia a na poskytovanie mnohých informácií. V časti A je zobrazovaná doba trvania rôznych programov a po zahájení činnosti aj doby zostávajúcej do jeho ukončenia; v prípade nastavenia ONESKORENÝ ŠTART bude zobrazená doba zostávajúca do zahájenia zvoleného programu. Okrem toho, pri stlačení príslušného tlačidla budú zobrazené maximálne hodnoty rýchlosti odstreďovania a teploty, ktoré zariadenie môže dosiahnuť, v závislosti od nastaveného programu.
Ako vykonať prací cyklus SK Rýchle nastavenie programu 1. NAPLŇTE PRÁČKU PRÁDLOM. Otvorte dvierka. Naplňte práčku prádlom pričom dbajte, aby nedošlo k prekročeniu množstva náplne, uvedeného v tabuľke programov na nasledujúcej strane. 2. NAPLŇTE DÁVKOVAČ PRACÍCH PROSTRIEDKOV. Vytiahnite dávkovač pracích prostriedkov a naplňte prací prostriedok do príslušných priehradiek, spôsobom vysvetleným v časti “Pracie prostriedky a prádlo”. 3. ZATVORTE DVIERKA. 4.
Programy a voliteľné funkcie 1 2 3 3 4 5 6 7 8 9 10 10 11 12 13 14 14 14 Špeciálne Sport 30° Tmavé 30° Zabránenie zápachu (Bavlna) 60° Zabránenie zápachu (Syntetické) 40° Jemné 30° Vlna: Pre vlnu, kašmír, atď. 40° Prádlo plnené perím: Pre prádlo plnené husím perím. 30° Standard Bavlna s predpieraním: Mimoriadne znečistené biele prádlo. 90° 60° štandardné programy pre bavlnu 60°C (1): Značne znečistené (Max. 90°) biele a farebné prádlo z odolných tkanín.
SK Push & Wash Táto funkcia umožňuje zahájiť prací cyklus aj pri vypnutom zariadení bez toho, aby bolo potrebné najskôr stlačiť tlačidlo ON/OFF alebo následne, pri zapnutí zariadenia, bez použitia akéhokoľvek ďalšieho tlačidla a/alebo otočného ovládača (v opačnom prípade bude program Push & Wash zrušený). Kvôli zahájeniu cyklu Push & Wash držte stlačené tlačidlo po dobu 2 sekúnd. Rozsvietená kontrolka signalizuje, že cyklus bol zahájený.
Pracie prostriedky a prádlo Dávkovač pracích prostriedkov Dobrý výsledok prania závisí aj od správneho dávkovania pracieho prostriedku: použitie nadmerného množstva znižuje efektivitu prania a napomáha tvorbe vodného kameňa na vnútorných častiach práčky a zvyšuje znečistenie životného prostredia. ! Nepoužívajte pracie prostriedky určené na pranie v rukách, pretože spôsobujú tvorbu nadmerného množstva peny.
SK Štandardné programy pre bavlnu 20°C (program 12) ideálny pre náplne zo nečistenej bavlny. Účinné pranie i za studena, porovnateľné s raním pri 40 °C, dosiahnuté mechanickým pôsobením, ktoré je založené na zmene rýchlosti v krátkych alebo dlhých intervaloch. Eco Syntetické (program 13) ideálny pre zmiešané náplne (bavlna a syntetika) stredne znečisteného prádla. Účinné pranie i za studena je dosiahnuté mechanickým pôsobením, ktoré je založené na zmene rýchlosti v stredných alebo určených intervaloch.
Poruchy a spôsob ich odstránenia Môže sa stať, že práčka nebude fungovať. Skôr, ako zatelefonujete na Servisnú službu viď “Servisná služba”) skontrolujte, či sa nejedná o problém ľahko odstrániteľný pomocou nasledujúceho zoznamu. SK Poruchy: Možné príčiny / Spôsob ich odstránenia: Pračku nie je možné zapnúť. • Zástrčka nie je zasunutá v elektrickej zásuvke, alebo nie je zasunutá dostatočne, aby došlo k spojeniu kontaktov. • V celom dome je vypnutý prúd. Nedochádza k zahájeniu pracieho cyklu.
Servisná služba SK Pred obrátením sa na Servisnú službu: • Skontrolujte, či nie ste schopní poruchu odstrániť sami (viď “Poruchy a spôsob ich odstránenia”); • Opätovne uveďte do chodu prací program, s cieľom overiť, či bola porucha odstránená; • Ak to nie je možné, obráťte sa na Stredisko servisnej služby. ! Nikdy sa neobracajte so žiadosťou o pomoc na technikov, ktorí nie sú na vykonávanie tejto činnosti oprávnení. Pri hlásení poruchy uveďte: • druh poruchy; • model zariadenia (Mod.
SK 43
195124306.00 04/2014 - Xerox Fabriano SK Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.indesit.