User's Manual

Troubleshooting Guide
Leak Related Problems
1. The BKO has a leak down the barrel.
Reason: gas is leaking through or around the valve pin seal or
O-ring area.
a. Can you hear the leak when the gas is removed? Yes? There is no leak. You
hear the ocean.
b. The valve seal is marred, scratched, worn out or dirty. Replace it.
2. The BKO has a leak around the high pressure regulator seam.
Reason: the seal between the regulator body and the main
body or the regulator adapter is bad.
a. Tighten the regulator to the body.
b. Check and/or replace the O-RING.
3. The BKO has a leak around the low pressure regulator seam.
Reason: the seal between the regulator body and regulator
adapter body is bad or the regulator has loosened up.
a. Tighten the regulator into the body.
b. Check and/or replace the O-RING gasket. Size -019.
4. The BKO has a leak inside the grip/battery area.
Reason: the 3-way valve is leaking.
a. Check for over-pressurization from the low pressure regulator. Re-adjust the
low pressure regulator per instructions on the previous pages.
b. Tighten the 3-way valve to the manifold. Take care not to over-tighten.
c. Replace the solenoid/valve assembly.
14