Instructions / Assembly

3.6
#4
#5
.
D
3.1
3.4 3.5 3.6
3.2 3.3
NOTE Anti-jump bumpers must be
installed to prevent door from derailing.
Loosely fasten the anti-jump bumpers
2” from each door hanger. To be able
to install the door on rail, anti-jump
bumpers must be turned towards the
front of the door.
Hang the door on the rail, ensure the
door is levelled then, fix the door guides
on the floor on the opening side, as
close to the doorway as possible.
* NOTE for door guides two types of
guide are provided. Use according to
your type of door.
NOTE Stoppers are used to avoid the
door from rolling out the edge of the
rail on both ends.
Close the door to the desired position
insert and secure the door stopper by
tightening both screws.
Open the door to the desired position
and repeat with the door stopper.
34’’ from the floor mark the location of
the 2 holes of the handle. Drill 1/8 pilot
holes at each mark, then screw in place.
Turn anti-jump bumpers so they are on
top of the door and underneath the rail.
Thighten the screws.
Place the 2 last lag screws through
the holes and spacers on each end
of the rail (#4 - #5) and fully
thighten them.
3. Complete your installation
TOP VIEW
TOP VIEW
DO NOT RETURN TO RETAILER
If you have any questions, please contact
our customer service at:
[e-mail]
or call toll free at:
1-800-361-2030
VISIT OUR WEB SITE
www.colonialelegance.com
*1 year limited warranty
POIGNÉE
À 34˝ du sol, marquer l’emplacement
des 2 trous de la poignée. Avec une
mèche 1/8 pré-percer, puis visser la
poignée en place.
•
colonialelegance inc.
Telephone: [phone]
Toll free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8