User's Manual

CAS-GPS Node II User
Manual
CAS-GPS Node II User Manual (DOCU0142) Rev D Page 16 of 21
10 SERVICE, MAINTENANCE & DISPOSAL
10.1 EQUIPMENT SERVICE
10.1.1 Display Unit
Clean screen surface with a clean dry soft cloth - Do not use solvents or cleaners on the screen surface!
Check for physical damage to screen surface.
Check the cable is securely connected to the display.
Check the mounting bracket is secure – finger tighten only if loose.
10.1.2 System
Check visually that all Nodes are in good condition and the cables (where applicable) are securely connected.
Check visually that no cables are loose or damaged.
Verify that the system is working correctly prior to starting the vehicle and during operations.
10.1.3 Scheduled System Servicing
It is recommended that the system undergo preventative scheduled maintenance and inspections. These should be
carried out by trained and authorized personnel every 6 months or 1500hrs (whichever occurs first).
10.2 EQUIPMENT MAINTENANCE
If the system is not functioning as expected and a fault cannot be resolved, please contact your nearest authorized
representative.
10.3 DECOMMISSIONING
Removal of the system should only be performed if authorized by the owner of the vehicle.
Removal should be performed by a qualified person.
All system components and wiring should be removed.
All vehicle wiring should be restored back to original condition.
Dispose or store removed system in accordance with this manual.
10.4 DISPOSAL
The electronic equipment discussed in this manual must not be treated as general waste. By ensuring that this product is
disposed of correctly, you will be helping to prevent potentially negative consequences for the environment and human health
which could otherwise be caused by incorrect waste handling of this product.
The system should be disposed of in accordance with local regulations.
It is essential that no attempt be made to repair the equipment (other than
replacement of system components). Opening equipment enclosures should never
be attempted and will void any warranty and could compromise the safe operation
of the system. Replacing System Components will require the system to be re-
configured as per the associated installation manual to suit your system setup.
The system contains a Lithium Ion Battery and should be disposed of in
accordance with local regulations.