Use and Care Manual

Piping

The pipework should be installed using standard tools and connected in such a way that there is no AIR leaking from the

connections. Any malfunction and leakage in the system can also be avoided with an installation that is properly adjusted

taking into account the possible movements and loosening of the connections for varied reasons.



1) The

pipes

should be assembled in accordance with the

direction of circulation of the compressed air after

inspection of the inlet and outlet of the AIR DRYER.

(Assembling the

pipes

in the wrong direction causes the

AIR DRYER to malf

unction).



2) The

pipes

should not rest directly on the AIR DRYER but

on a support so that they are isolated from the device.



3) Condensed water coming in from the outlet of the drain

device should be evacuated through a separate

pipe.



4) The AIR DRYER should be isolated from the vibrations of

the AIR COMPRESSOR.



5) It is recommended to install a bypass line in order to

facilitate repairing the AIR DRYER (use connecting

pipes



6) It is also recommended to use

non-

corrosive piping for

bett

er corrosion resistance.