Instruction Manual

IDS 430/433 Users Manual Version 1.0

- 16 -

stores it in the tare register. The IDS 430/433 switches to NET mode and

displays the net weight.

KEYBOARD TARE:

Use the numeric keys to enter a tare weight. Press the TARE key. The IDS

430/433 stores the entered weight in the tare register and switches to NET

mode and displays the net weight.

CLEAR TARE:

Press the numeric ZERO key. Press the TARE key. The tare weight is

cleared to zero and the IDS 430/433 switches to the GROSS mode displaying

the gross weight.

Gross/Net

Press the Gross/Net key to alternate between Gross and Net display modes.

Press the PRINT key to print weight data. Page format 1 is printed if the IDS

430/433 is in Gross display mode and page format 2 is printed in the Net display

mode. See the Parameter Functions section (Page 7-5) for setup of print

formats.

F1 and F2

The F1and F2 keys can be configured to execute any scale basic function, see

(parameters 57 and 58 to set the key functions).

When the indicator is in data entry mode, the F1 key can be used for entering a

minus sign; the F2 key can be used to enter a decimal point.

Memory Register Entry

Use the numeric keypad to enter the memory register number (1 to 16). Press

the ENTER key. The IDS 430/433 displays "reg xx" for 1 second and then

displays the current memory register value. Press the CLEAR key if no change is

to be made or enter a new value and then press the ENTER key. Memory

registers are used by the Event Monitor to calculate setpoint values store weight

data and execute math functions.

NOTE: memory registers are set to zero at power up unless the battery back up

is enabled CFG 41.

Execute a Scale Basic Function

The IDS 430/433 provides up to 16 user programmable functions. User

programs 1 thru 16 can be executed by entering 1 to 16 respectively for the key

function parameter (CFG parameters 51 – 58). See the "Scale Basic / Event

Monitor" manual or quick reference guide for more information.

Display Time/Date

Enter 19 to display the time. Press Enter to display the date. Press Enter again to

return to Gross/Net display.