Instruction Manual

IDS 430/433 Users Manual Version 1.0
- 51 -
Function 66 Set Time and Date
Use function 66 to set the time and date. Entering 19 can display the time and
date when the meter is in the idle mode. Date will be printed in a Y2K compliant
four-digit year.
1. Hold the CLEAR key down and press the ENTER key to enter the configure
mode.
2. Enter CFG 66. The IDS 430/433 prompts “t”. Enter the time using 5 digits.
The last digit should be 0 for AM, 1 for PM, or 2 for 24-hour time.
3. The IDS 430/433 prompts “D”. Enter the date using 6 digits in the format
MMDDYY.
Function 67 Display Operation Parameters
Use function 67 to view operation parameters. This function allows viewing the
parameters when the password is not available.
1. Hold the CLEAR key down and press the ENTER key to enter the configure
mode.
2. Enter CFG 67. The IDS 430/433 prompts “PAR xx” where xx is the currently
selected parameter number. Press the ENTER key to view the parameter
data or enter a parameter number to view.
3. Press the CLEAR key to exit function 67.
Function 68 Print Operation Parameters
1. Hold the CLEAR key down and press the ENTER key to enter the configure
mode.
2. Enter CFG 68. The IDS 430/433 prompts “Print”. Press the ENTER key to
print the operation parameters or press the CLEAR key to exit without
printing.