Manual

DT 200 Users Manual version 1.E Set Operation Parameters
28
Enter a 0 to disable TTL remote control.
Battery, Watch Dog Timer
Parameter 41 Battery Backup (0 [no])
The battery is used to preserve the time and date, memory registers, and ID memory
when power is lost. Set the Battery Backup parameter to ON (1) to prevent the DT200
from clearing memory when power is restored, set parameter 41 to OFF (0) to erase
memory when power is restored.
Parameter 42 Enable Watch Dog Timer (0 [no])
The watchdog timer resets the DT200 when the weight display is not updated within the
time-out time (0.2 sec). Set the Enable ON (1) to reset after time-out. Set the Enable
OFF (0) to turn off the watchdog timer.
Parameters 43-50 Fixed Registers
The Fixed Registers are used by the Trip-Level Event Monitor to determine when a trip-
level is reached. See the “Scale Basic / Event Monitor” manual for more information.
Parameters 43 thru 50 select Fixed Setpoints 1 thru 8. Select the parameter number to be
changed and then enter the trip-level weight.
Parameters 51-58 Keyboard Event Functions
The keyboard event functions determine what actions take place when a key is pressed.
The Power on start function activates a function when power is applied to the indicator.
Number Parameter Name Default Value Password
51 Power on start function 0 (no function executed) 2
52 PRINT key function 136 (Print function) 2
53 UNITS key function 127 (Units toggle function) 2
54 Gross/Net key function 128 (Gross/Net toggle) 2
55 TARE key function 129 (Tare function) 2
56 ZERO key function 0 (no function) 2
57 Function Key 1 (F1) 0 (no function executed) 2
58 Function Key 2 (F2) 0 (no function executed) 2